1. SHUTOFF/SPEED CONTROL VALVE
D D SEE C
EE
20. CYLINDER PORT TUBE
21. SUPPLY PORT TUBE
31. CLAMP
30. PRESSURE TUBE FOR
(2 LOCATIONS) THE SHUTOFF VALVE ACTUATOR
TURBINE DRIVE REMOVED FROM AIRPLANE
24. PACKING
23. UNION 34. PACKING
33. JAMNUT
32. 45` ELBOW
D-D E-E
Shutoff and Speed Control Valve Unit Installation Figure 401 (Sheet 3)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
29-11-09
ALL ú ú 01 Page 404 ú Feb 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 747-400 MAINTENANCE MANUAL
8. GASKET
ACTUATOR FOR
THE SPEED
CONTROL VALVE
F
1. SHUTOFF/SPEED
CONTROL VALVE F
35. SHUTOFF AND
MODULATOR
36. SHUTOFF SUPPLY TUBE
SUPPLY TUBE F
G
G SHUTOFF VALVE
ACTUATOR
F
WATER SEPARATOR
FOR THE SHUTOFF
VALVE ACTUATOR
C
38. PACKING
41. JAMNUT
37. TEE FITTING 42. PACKING
40. ELBOW
ACTUATOR
39. JAMNUT PRESSURE PORT
(2 LOCATIONS) F-F G-G
Shutoff and Speed Control Valve Unit Installation Figure 401 (Sheet 4)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
29-11-09
ALL ú ú 01 Page 405 ú Feb 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
S 024-045
(3)
Remove the shutoff and speed control valve (1):
(a)
Remove the nut (2), the washers (3), the spacer (4), and the bolt (5).
(b)
Remove the clamps (6).
(c)
Disconnect the cylinder port tube (20) from the electrical component assembly.
CAUTION:_______BE CAREFUL WHEN YOU DISCONNECT THE SUPPLY PORT TUBE. THE FILTER CAN FALL OUT OF THE TUBE. THIS CAN CAUSE DAMAGE TO THE FILTER.
(d)
Disconnect the supply port tube (21) from the electrical component assembly.
CAUTION: BE CAREFUL WHEN YOU DISCONNECT THE PRESSURE TUBE FOR THE
_______ CONTROL AIR. THE FILTER CAN FALL FROM THE TUBE. THIS CAN CAUSE DAMAGE TO THE FILTER.
(e)
Disconnect the pressure tube (19) for the control air from the union (23).
(f)
Remove the bolt (27), the washers (28), and the nut (29) from the clamp (31).
(g)
Remove the clamp (31) from the shutoff supply tube (36).
(h)
Disconnect the cylinder port tube (20) from the elbow. 1) Remove the tube.
(i)
Disconnect the supply port tube (21) from the tee fitting (37). 1) Remove the tube.
(j)
Disconnect the pressure tube (30) for the shutoff valve actuator from the elbow (40).
(k)
Disconnect the governor unit tube (26) from the union (23).
(l)
Remove the clamp (7) that connects the shutoff and speed control valve (1) to the turbine drive inlet (25).
(m)
Remove the nuts (10) and the washers (11).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
29-11-09
ALL ú ú 01 Page 406 ú Feb 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
(n)
Move the bolts (17) out of the mounting flange and remove the washers (14), springs (9), spacers (15), and the nuts (16).
(o)
Carefully disconnect the shutoff and speed control valve (1) from the turbine drive (25).
(p)
Remove the washers (12) and the shims (13).
(q)
Remove the shutoff and speed control valve (1).
(r)
Remove the gasket (8) from the turbine drive inlet (25). 1) Discard the gasket.
S 034-016
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 液壓 HYDRAULIC 1(123)
