(2)
AMM 54-62-00/201, Nacelle Strut Access Panels
D.
Access
(1)
Location Zone
454 System 1 - Strut Aft Fairing
464 System 2 - Strut Aft Fairing
474 System 3 - Strut Aft Fairing
484 System 4 - Strut Aft Fairing
(2)
Access Panel 454AL Trailing Edge Fairing Doors - System 1 464AL Trailing Edge Fairing Doors - System 2 474AL Trailing Edge Fairing Doors - System 3 484AL Trailing Edge Fairing Doors - System 4
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
29-11-18
ALL ú ú 01 Page 206 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
E. Procedure
S 642-011
(1)
Lubricate all the fittings, the packings, and the backup rings with hydraulic fluid.
S 432-070
(2)
If a new module is to be installed, install the parts on the case drain module:
(a)
Install the adapter (1), the jam nut (2), the packing (3), the backup ring (4), and the packing (5) in ports A and B.
(b)
Install the adapter (33), the jam nut (2), the packing (3), the backup ring (4), and the packing (5) in the port OUT.
(c)
On systems 1, 2, and 3, install the plug (15) and the packing (16) in the AUX port.
(d)
On system 4, install the adapter (17), the jam nut (18), the packing (19), the backup ring (20), and the packing (21) in the AUX port.
S 422-071
(3)
Install the case drain module:
(a)
Remove the caps from the openings.
(b)
Install the case drain module with the bolts (30), the washers (31), and the nuts (32). 1) Tighten the bolts.
(c)
Connect the tubes to ports A, B, OUT, and on system 4, AUX.
(d)
Connect the electrical connector to the module.
S 862-016
(4)
Close the applicable HYDIM circuit breaker:
(a)
P7 Overhead Circuit Breaker Panel
1) 7F3 HYDIM 1
2) 7G3 HYDIM 2
3) 7H3 HYDIM 3
4) 7J3 HYDIM 4
S 862-017
(5)
Pressurize the hydraulic system with the EDP or the demand pump (AMM 29-11-00/201).
S 792-072
(6)
Examine the case drain module for leakage.
(a)
If you find leakage, repair the cause of it.
S 712-018
(7)
Look at the EICAS maintenance page for 29 HYD.
(a)
Make sure a HYD TEMP indication shows on the display for the applicable system.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
29-11-18
ALL ú ú 01 Page 207 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
S 862-019
(8) Release the pressure in the hydraulic system if it is not necessary for other operations (AMM 29-11-00/201).
S 412-021
CAUTION: MAKE SURE YOU LATCH THE FAIRING DOORS ON THE TRAILING EDGE
_______ CORRECTLY. DAMAGE CAN OCCUR IF THE DOORS OPEN DURING A FLIGHT.
(9) Close the fairing doors on the trailing edge of the applicable strut (AMM 54-62-00/201).
TASK 29-11-18-002-022
4. Case Drain Filter Element Removal (Fig. 201)
_________________________________
A. References
(1)
AMM 29-11-00/201, Main Hydraulic Supply System
(2)
AMM 36-00-00/201, Pneumatic System
(3)
AMM 54-62-00/201, Nacelle Strut Access Panel
(4)
IPC 29-11-18 Fig. 1
B.
Access
(1)
Location Zone
454 System 1 - Strut Aft Fairing
464 System 2 - Strut Aft Fairing
474 System 3 - Strut Aft Fairing
484 System 4 - Strut Aft Fairing
(2)
Access Panel
454AL Trailing Edge Fairing Doors - System 1
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 液壓 HYDRAULIC 2(24)
