29-11-19
 ALL  ú ú 01 Page 403 ú Feb 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 024-034
 (8)  
Remove the ACMP (1):

 (a)  
Remove the mounting bolt (3), the washers (4), and the nut (5).

 (b)  
Remove the mounting bolts (7), the washers (20), and the nuts (21).

 (c)  
Disconnect the ground strap (6) from the ACMP (1).

 (d)  
Remove the ACMP (1) from the strut.

 S 164-013
 (9)  
Remove all the hydraulic fluid from the airplane structure (AMM 12-25-01/301).

 S 034-014

 (10)
 If a new ACMP is to be installed, remove the unions:

 (a)  
The union (17) and the packing (16) from the supply port 1) Discard the packing.

 (b)  
The union (11) and the packing (12) from the pressure port 1) Discard the packing.

 (c)  
The union (8) and the packing (9) from the case drain port. 1) Discard the packing.

 S 174-037
 (11)
 If you replace the ACMP for one of the conditions which follow, do the procedure which is necessary to flush the system or replace the filters (AMM 29-11-00/201).

 (a)  
Mechanical failure.

 (b)  
Leakage at the shaft or housing seal.

 (c)  
The ACMP became too hot.

 TASK 29-11-19-404-015
 3.  AC Motor-Driven Pump (ACMP) Installation (Fig. 401)________________________________________
 A. Consumable Materials
 (1)  D00153 Fluid - Hydraulic, Fire Resistant BMS 3-11
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 29-11-19
 ALL  ú ú 01 Page 404 ú Jun 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 B. Parts
 ~.............................................................................. | MM | | IPC | ................. ............................ | FIG | ITEM | NOMENCLATURE | SUBJECT | FIG | ITEM | ................................................................................ | 401 | 1 | AC Motor-Driven Pump (ACMP) | 29-11-19| 02 | 160 | | | 3 | Bolt | | | 5 | | | 4 | Washer | | | 10 | | | 5 | Nut | | | 15 | | | 7 | Bolt | | | 110 | | | 8 | Union | | | 135 | | | 9 | Packing | | | 155 | | | 11 | Union | | | 130 | | | 12 | Packing | | | 145 | | | 16 | Packing | | | 150 | | | 17 | Union | | | 140 | | | 20 | Washer | | | 115 | | | 21 | Nut | | | 120 | 2......…........…...................................…..........….....….........1
 C. References
 (1)  
AMM 12-12-01/301, Hydraulic Replenishment

 (2)  
AMM 20-22-01/601, Electrical Bonding

 (3)  
AMM 24-22-00/201, Manual Control

 (4)  
AMM 36-00-00/201, Pneumatic System

 (5)  
AMM 54-62-00/201, Nacelle Strut Access Panels

 (6)  
AMM 71-00-00/201, Power Plant

 D.
Access

 (1)  
Location Zone
 464 System 2 - Strut Aft Fairing
 474 System 3 - Strut Aft Fairing

 (2)  
Access Panel 464AL Trailing Edge Fairing Doors - System 2 474AL Trailing Edge Fairing Doors - System 3

 E.
Procedure

 S 434-016
 (1)  
If a new ACMP is to be installed, install the unions:

 (a)  
The packing (9), lubricated with hydraulic fluid, on the union

 (8)
 (b)  The packing (12), lubricated with hydraulic fluid, on the union
 (11)
 (c)  The packing (16), lubricated with hydraulic fluid, on the union
 (17)
 (d)  The union (17) in the supply port 1) Tighten the union (17) to 428-472 pound-inches (47-52 N.m).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 液壓 HYDRAULIC 2(30)