(2)  
AMM 20-11-19/401, O-Rings

 (3)  
AMM 51-31-01/201, Seals and Sealing

 D.  Access
 (1)  Location Zones
 243/244 Area Above Ceiling (external)
 253/254 Area Above Ceiling (external)

 E.  Prepare for the Removal
 S 864-002
 (1)  Open the circuit breaker for the applicable ADF antenna:
 (a)  P7 Overhead Circuit Breaker Panel
 1) 7B9 NAV RADIO ADF L
 2) 7B20 NAV RADIO ADF R

 F.  Procedure
 S 034-003
 (1)  Loosen the captive mounting screws.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 34-57-02
 ALL  ú ú 02 Page 401 ú Jun 10/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

NOTE:
SEALANT

ADF Antenna Installation
Figure 401

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 34-57-02
 ALL  ú ú 02 Page 402 ú Jun 10/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 144-004
 CAUTION: BE CAREFUL WHEN YOU USE FORCE WITH THE SEALANT REMOVAL TOOL TO
_______ BREAK THE ANTEANNA SEAL. TOO MUCH FORCE CAN CAUSE DAMAGE TO THE AIRPLANE SKIN OR THE ELECTRICAL CABLE AT THE ANTENNA BOTTOM.
 (2)  Use the sealant removal tool to remove the seal around the antenna base.
 S 014-038
 CAUTION: MOVE THE ANTENNA ONLY AS FAR AS NECESSARY TO DISCONNECT THE
_______ CABLE. DAMAGE TO THE ANTENNA CABLE CAN OCCUR IF YOU PULL THE CABLE TOO FAR.
 (3)  
Move the antenna until you can get access to the antenna cable connector.

 S 034-006

 (4)  
Disconnect the antenna cable.

 NOTE: Do not let the antenna cable fall into the fuselage.
____
 S 034-007
 (5)  
Put a protective cover on the cable connector.

 S 024-008

 (6)  
Remove the ADF antenna and O-ring (AMM 20-11-19/401).

 S 144-009

 (7)  
Remove the sealant from the airplane skin in the antenna area (AMM 51-31-01/201).

 S 114-010

 (8)  
Clean the airplane surface in the antenna area with solvent and a clean rag. Remove any dirt, grease, corrosion, etc. (AMM 20-11-14/701).

 S 154-011

 (9)  
Remove any teflon paint and primer from the area where the airplane skin and antenna will touch (AMM 20-11-14/701).

 TASK 34-57-02-404-012
 3. Install the ADF Antenna (Fig. 401)
_______________________
 A. Standard Tools and Equipment
 (1)  Resistance measuring bridge or ohmmeter that
 can measure 25 milliohms

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 34-57-02
 ALL  ú ú 02 Page 403 ú Jun 10/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 B. Consumable Materials
 (1)  
G01395 Compound - Corrosion Inhibiting,
 BMS 3-27

 (2)  
D00294 Grease - BMS 3-24

 (3)  
A00145 Sealant - Aerodynamic BMS 5-95,
 Class B-2 or BMS 5-142

 (4)  
C00855 Alodine

 (5)  
C00175 Primer - BMS 10-79 type III

 (6)  
B00512 Solvent (alternative) - Naphta, Commercially available

 (7)  
B00148 Solvent (alternative) - Methyl Ethyl Ketone (MEK), TT-M-261

 C. References
 (1)  
AMM 20-11-19/401, O-Rings

 (2)  
AMM 24-22-00/201, Manual Control

 (3)  
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機(jī)維護(hù)手冊 導(dǎo)航 NAVIGATION 3(100)