(b)
Make sure the display is X1XXXXXX.
S 865-069
(7) Push the GND PROX CONFIG GR OVRD switch (P3-4).
(a)
Make sure the OVRD indication does not show.
(b)
Make sure the display is X0XXXXXX.
S 865-070
WARNING: MAKE SURE THAT ALL PERSONNEL ARE CLEAR OF THE LANDING GEAR AND
_______ THE LANDING GEAR DOORS BEFORE YOU MOVE THE LANDING GEAR CONTROL LEVER. INJURY TO PERSONNEL AND DAMAGE TO THE AIRCRAFT CAN OCCUR.
(8) Move the landing gear lever to the DOWN position.
(a) Make sure the display is X1XXXXXX.
H. Flap Input Discrete Test
S 865-071
(1)
Select < OTHER FUNCTIONS from the CMC menu.
(2)
Select < INPUT MONITORING.
S 865-072
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
34-46-00
ALL ú ú 02B Page 508 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
S 865-073
(3)
Select HEX display.
S 865-074
(4)
Enter E/002/351/00.
S 865-075
WARNING: MAKE SURE THAT THE FLAP OPERATIONS ARE CLEAR BEFORE FLAPS ARE
_______ MOVED. IF YOU DO NOT, INJURY TO PERSONS OR DAMAGE TO EQUIPMENT CAN OCCUR.
(5) Apply hydraulic pressure to hydraulic systems 1 and 4 to move the flaps (AMM 29-11-00/201).
NOTE: If the flaps are in the landing position (25 or 30 degrees),
____ it is not necessary to pressurize the hydraulic systems since flap movement is not required.
It is acceptable to move flaps electrically as an alternate method.
S 865-076
(6) Set the flap handle to the landing (25 or 30 degree) position.
NOTE: Permit time for the flaps to move to the landing position.
____
S 865-077
(7)
Open these circuit breakers:
(a) P7 Circuit Breaker Panel
1) C14 FLT CONT ELEC 1R AC
2) C15 FLT CONT ELEC 1R DC
(8)
Make sure the display is XX1XXXXX.
S 865-079
(9)
Open these circuit breakers:
(a) P7 Circuit Breaker Panel
1) C10 FLT CONT ELEC 2L AC
2) C11 FLT CONT ELEC 2L DC
3) C12 FLT CONT ELEC 1L AC
4) C13 FLT CONT ELEC 1L DC
(10)
Make sure the display is XX0XXXXX.
S 755-078
S 755-080
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
34-46-00
ALL ú ú 02B Page 509 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
S 865-081
(11) Push the GND PROX FLAP OVRD switch (P3-4).
(a)
Make sure the OVRD indication shows.
(b)
Make sure the display is XX1XXXXX.
S 865-082
(12) Push the GND PROX FLAP OVRD switch (P3-4).
(a)
Make sure the OVRD indication does not show.
(b)
Make sure the display is XX0XXXXX.
S 865-083
(13) Close these circuit breakers:
(a) P7 Circuit Breaker Panel 1) C10 FLT CONTR ELEC 2L AC 2) C11 FLT CONT ELEC 2L DC 3) C12 FLT CONT ELEC 1L AC 4) C13 FLT CONT ELEC 1L DC 5) C14 FLT CONT ELEC 1R AC 6) C15 FLT CONT ELEC 1R DC
I. Glideslope Inhibit Input Discrete Test
S 865-084
(1)
Select < OTHER FUNCTIONS from the CMC menu.
S 865-085
(2)
Select < INPUT MONITORING.
S 865-086
(3)
Select HEX display.
S 865-087
(4)
Enter E/002/351/00.
