曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 B.  This procedure is applicable for the left and right FMC. You can use the same diskette to download the BITE data from the left and right FMC.
 C.  The format for the file names for BITE data is as follows: TTTTTTXX.YYZ
 Where XX - day (from GMT clock) YY - hour (from GMT clock) Z - FMC position (R or L) TTTTTT - characters 2 through 7 of the tail number. ("BITEDL" is default if tail number from the EIU is not available)
 D.  After you get the BITE data, send the diskettes to Honeywell for
 Boeing/Honeywell investigation:

 Honeywell Inc.
 Commercial Flight Systems Group
 21111 N. 19th Avenue
 Phoenix, AZ 85027-2708

 ATTENTION:
 PRODUCT SUPPORT, 747 FMC BITE INFO, M/S. DV9S

 TASK 34-61-11-972-001
 2.  FMC BITE History Data Download
______________________________
 A.  Equipment
 (1)  A formatted 3-1/2 inch high density floppy diskette which contained the applicable configuration file.
 NOTE: You can get a copy of this diskette from your local Honeywell
____ Customer Support Representative or Customer Engineering at Honeywell Commercial Flight Systems Group in Phoenix, AZ.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH FMC SOFTWARE ú

 34-61-11
 PS4052540-940 AND SUBSEQUENT  ú ú 04 Page 201 ú Jun 10/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 B. References
 (1)  AMM 24-22-00/201, Manual Control
 C. Access
 (1)  Location Zone
 221 Control Cabin, LH
 222 Control Cabin, RH

 D. Procedure
 S 862-002
 (1)  
Supply electrical power (AMM 24-22-00/201).

 S 862-003

 (2)  
Make sure these circuit breakers are closed:

 (a)  
P6 Main Power Distribution Panel
 1) 6L35 FMCS DATA BASE

 (b)  
P7 Overhead Circuit Breaker Panel
 1) 7C1 FMCS FMC L
 2) 7C23 FMCS FMC R

 

 

 S 862-004
 (3)  
Set the captain's NAV SOURCE SELECT switch on the P1 captain's main instrument panel to the FMC L position.

 S 862-005

 (4)  
Set the F/O's NAV SOURCE SELECT switch on the P3 F/O's main
 instrument panel to the FMC R position.

 S 862-006

 (5)  
Do these steps for the applicable FMC to get to the BITE X REPORT page on the MCDU:

 NOTE: X is L when you do the download procedure of the BITE data
____ from the left FMC, or R when the BITE data is from the right FMC.
 (a)  
If on the MENU page, push the LSK (line select key) adjacent to the <FMC prompt.

 (b)  
Push the INIT REF mode key to show the <INDEX prompt.

 (c)  
Push the LSK adjacent to the <INDEX prompt to show the INIT/REF INDEX page.

 (d)  
Push the LSK adjacent to the MAINT> prompt to show the MAINTENANCE INDEX page.

 (e)  
Push the LSK adjacent to the BITE> prompt to show the BITE X REPORT page.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH FMC SOFTWARE ú

 34-61-11
 PS4052540-940 AND SUBSEQUENT  ú ú 10 Page 202 ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 NOTE: To do the download of the BITE data from the left FMC, set
____ the selector switch for the data loader to the FMC-L position. To do the download of the BITE data from the right FMC the selector switch for the data loader must be in the FMC-R position.
 S 862-016
 (6)  Set the channel select selector to LEFT or RIGHT, and the data load select selector to the FMC position.
 NOTE: To do the download of the BITE data from the left FMC, set
____ the channel selector to LEFT , and the data load selector to FMC. To do the download of the BITE data from the right FMC, the channel selector must be in the RIGHT position and the data load selector set to FMC .
 S 972-008
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 導航 NAVIGATION 3(196)