(6)  
Set the MCDP to test 02 TMC.

 S 755-015
 S 865-016
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 22-32-00
 ALL  ú ú 12 Page 503 ú Sep 20/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
 S 865-114
 (7) Push the YES/ADV switch.
 NOTE: The MCDP message IN PROGRESS is shown when an automatic
____ test step is being done. An automatic move forward to the subsequent test step or a fail message is provided upon completion of the step.
 S 755-018
 (8)
Make sure the MCDP message 02 VFY THRST LVR SYST CLR-ADV is shown.

 S 755-019

 (9)
Make sure the throttle levers are clear.

 S 865-020

 (10)
 Push the YES/ADV switch.

 S 755-021

 (11)
 Make sure the MCDP message 02 SET MCP A/T SW TO ARM is shown.

 S 865-022

 (12)
 Set the A/T ARM switch on the MCP to the ARM position.

 S 755-023

 (13)
 Make sure the throttle levers move a small distance after the A/T ARM switch is set to ARM.

 S 755-024

 (14)
 Make sure that no MCDP fault messages are shown.

 S 755-025

 (15)
 Make sure the MCDP message 02 TEST COMPLETE is shown.

 S 865-026

 (16)
 Push the YES/ADV switch.

 S 865-027

 (17)
 Set the EEC ground test switches to off.

 F. Test the Thrust Mode Select Panel (TMSP)
 NOTE: This test makes sure the TMSP and its interface to the TMC
____ operates correctly. The test includes operation of the TMSP mode on and off switches and operation of the TEMP SEL rotary switch.
 S 865-038
 (1) Set the MCDP to test 05 TMSP.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 22-32-00
 ALL  ú ú 14 Page 504 ú Sep 20/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL

 (2)  S 865-039Push the YES/ADV switch.
 (3)  S 755-040Make sure the MCDP message 05 TMSP TEST? is shown.
 (4)  S 865-041Push the YES/ADV switch.
 (5)  S 755-042Make sure the MCDP message 05 MAN TEST? is shown.
 (6)  S 865-043Push the YES/ADV switch.
 (7)  S 755-044Follow the steps shown on the MCDP for the top EICAS TMS mode display. (a) When the MCDP message 05 PUSH OFF SW PER MODE DSPLY is shown, push the applicable MODE (the MODE is shown on top EICAS display) switch on the TMSP.
 (8)  S 755-045Make sure the MCDP message TMSP 05 TURN TEMP SEL CW-DSPLY INC? is shown.
 (9)  S 865-046Turn the TEMP SEL knob on the TMSP clockwise.
 S 755-047

 (10)
 Make sure the EICAS temperature select display on the top EICAS display increases.

 S 865-048

 (11)
 Push the YES/ADV switch.

 S 755-049

 (12)
 Make sure the MCDP message 05 TURN TEMP SEL CCW-DSPLY DEC? is shown.

 S 865-050

 (13)
 Turn the TEMP SEL knob counterclockwise.

 S 755-051

 (14)
 Make sure the EICAS temperature select display decreases.

 S 865-052

 (15)
 Push the YES/ADV switch.

 S 755-053

 (16)
 Make sure the MCDP message 05 TEST COMPLETE is shown.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 22-32-00
 ALL  ú ú 11 Page 505 ú Dec 20/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

757 MAINTENANCE MANUAL
 G. Put the Airplane Back to Its Initial Condition
 S 865-054
 (1)  
Set the MCDP to off.

 S 865-092

 (2)  
Set the ELEC ENG CONTROL switches on the P5 panel to off. This removes EEC power.
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 AMM 飛機維護手冊 自動飛行 AUTOFLIGHT 2(129)