(b)  
GUN 051;
 11S6, MAINT CONT DSPL

 S 914-003
 CAUTION: DO NOT TOUCH THE MCDP BEFORE YOU DO THE PROCEDURE FOR
_______ ELECTROSTATIC DISCHARGE SENSITIVE DEVICES (AMM 20-41-01/201). ELECTROSTATIC DISCHARGE CAN CAUSE DAMAGE TO THE MCDP.
 (2)  
Do the procedure for electrostatic discharge sensitive devices (Ref 20-41-01).

 (3)  
Remove the MCDP (Ref 20-10-01).

 S 024-004
 TASK 22-41-01-424-005
 3.  Install the Maintenance Control Display Panel
_____________________________________________
 A.  References
 (1)  20-10-01/401, E/E Rack Mounted Components
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 22-41-01
 ALL  ú ú 04 Page 401 ú Jan 28/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

757 MAINTENANCE MANUAL
 (2)  
20-41-01/201, Electrostatic Discharge Sensitive Devices

 (3)  
24-22-00/201, Electrical Power - Control

 B. Access
 (1)  
Location Zones
 119/120 Main Equipment Center
 211/212 Flight Compartment

 (2)  
Access Panel
 119BL Main Equipment Center

 C. Procedure
 S 914-006
 CAUTION: DO NOT TOUCH THE MCDP BEFORE YOU DO THE PROCEDURE FOR
_______ ELECTROSTATIC DISCHARGE SENSITIVE DEVICES (AMM 20-41-01/201). ELECTROSTATIC DISCHARGE CAN CAUSE DAMAGE TO THE MCDP.
 (1)  
Do the procedure for electrostatic discharge sensitive devices (Ref 20-41-01).

 S 414-007

 (2)  
Install the MCDP (Ref 20-10-01).

 NOTE: Do not move the MCDP directly from a different airplane.
____ Only shop procedures can erase flight data on the MCDP. The MCDP can keep flight data for many flights. Make sure that all flight data is erased, unless the MCDP will be installed on the same airplane.
 S 864-008
 (3)  Remove the DO-NOT-CLOSE tag and close this circuit breaker on the P11 panel:
 (a)  GUN 001-050, 052-999;
 11S4, MAINT CONT DSPL

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 22-41-01
 ALL  ú ú 04 Page 402 ú Jan 28/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

757 MAINTENANCE MANUAL
 (b)  GUN 051;
 11S6, MAINT CONT DSPL

 D. The MCDP Test
 S 864-009
 (1)  
Supply electrical power (Ref 24-22-00).

 S 864-010

 (2)
Push the ON/OFF switch for a manual power-up and self-test.

 S 864-011

 (3)  
Make sure all the segments and switch lights come on during the test.

 S 864-012

 (4)  
Make sure the FAIL light goes off after 5 seconds.

 S 864-013

 (5)  
Make sure the FLT FAULTS annunciator light is on and the LAST FLT FAULTS? message is shown.

 S 864-014

 (6)  
Push the YES/ADV switch.

 S 864-015

 (7)
Make sure the NO LAST FLT FAULTS message is on MCDP display.

 S 864-016

 (8)  
Push the YES/ADV switch.

 S 864-017

 (9)  
Make sure the PREV FLT FAULTS? message is on MCDP display.

 (10)
 Push the YES/ADV switch.

 S 864-019

 (11)
 Make sure the NO PREV FLT FAULTS message is on MCDP display.

 S 864-018
 E. Put the Airplane Back to Its Usual Condition
 S 864-020
 (1)  Set the MCDP to OFF if it is no longer necessary.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 22-41-01
 ALL  ú ú 08 Page 403 ú Dec 20/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

757 MAINTENANCE MANUAL
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 AMM 飛機維護手冊 自動飛行 AUTOFLIGHT 2(182)