(7)
Remove the screws at the lower side of the forward doorway lining.

 (8)
Remove the forward doorway lining.

 (9)
Remove the exit sign (AMM 33-51-01).

 (10)
 Disconnect the girt bar engagement light.

 (11)
 Disconnect the emergency lights test switch.

 S 024-196
 S 014-079
 S 014-080
 S 024-197
 S 024-198
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 25-21-06
 ALL  ú ú 08 Page 410 ú May 28/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
 S 024-199
 (12)
 Remove the screws at the top doorway lining.

 S 014-119

 (13)
 Remove the top doorway lining.

 TASK 25-21-06-404-086
 9.  Install the No. 4 Doorway Lining (Fig. 401)________________________________
 A. References
 (1)
33-51-00/201, Floor Proximity Emergency Lights

 (2)
33-51-01/201, Electrically Illuminated Exit Signs

 B. Access
 (1)  Location Zone
 836/846 No. 4 Passenger Door

 C. Procedure
 S 424-099
 (1)
Put the top doorway lining in position in the bracket.

 S 424-200

 (2)
Install the screws in the seal retainer.

 S 424-201

 (3)
Connect the emergency lights test switch.

 S 424-202

 (4)
Connect the girt bar engagement light.

 S 414-120

 (5)
Install the exit sign (AMM 33-51-01).

 S 414-121

 (6)
Put the forward doorway lining in position in the bracket.

 (7)
Install the screws in the seal retainer.

 (8)
Install the assist handle.

 (9)
Connect the floor proximity emergency light (AMM 33-51-00).

 (10)
 Install the trim strips (View A-A, Fig. 401).

 (11)
 Install the acoustic seal in the seal retainer.

 S 424-203
 S 414-092
 S 424-204
 S 424-206
 S 424-207
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 25-21-06
 ALL  ú ú 08 Page 411 ú May 28/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

757 MAINTENANCE MANUAL
 CEILING LINING AND INSULATION - DESCRIPTION AND OPERATION
_________________________________________________________
 1.  Sculptured Ceiling Panels (Fig. 1)_________________________
 A.  The sculptured ceiling panels line the ceiling over the passenger compartment aisle. The sculptured ceiling panels are crush core with a tedlar covering on the exposed side. Two hinges support the sculptured ceiling panel on the outboard edge. The inboard edge fits in a groove on the center conditioned air outlet. A lanyard on the inboard edge, prevents the sculptured ceiling panel from swinging fully open.
 2.  Lowered Ceiling Panels (Fig. 1)______________________
 A.  The ceiling is lowered in galley and lavatory areas to provide space for lights, service units, galley vents, and life rafts. The lowered ceiling panels are hinged for access to these furnishings. Curved ceiling panels are outboard of the life raft compartments.
 3.  Ceiling Insulation__________________
 A.  The ceiling panels are insulated with fiberglass blankets attached to fuselage structure. The blankets thermally and acoustically insulate the passenger compartment. A waterproof covering protects the compartment from condensation.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 25-22-00
 ALL  ú ú 01 Page 1 ú Jan 20/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

757
MAINTENANCE MANUAL

HINGE(2 LOCATIONS) CENTER AIR OUTLET EXTRUSION
INBD A-A

Ceiling Panels
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 AMM 飛機維護手冊 EQUIPMENT/FURNISHINGS 1(53)