25-31-00
ALL ú ú 02A Page 5 ú Jun 15/87
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
FAULT ISOLATION/MAINT MANUAL
GALLEYS
* SEE THE WDM EQUIPMENT LIST
GUN 206
Galleys - Component Index Figure 101
E45559
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-31-00
ALL ú ú 14 Page 101 ú Dec 20/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
FAULT ISOLATION/MAINT MANUAL
NO. 1 PASSENGER DOOR - LEFT (REF)
FWD
Galleys - Component Location
Figure 102 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-31-00
ALL ú ú 14 Page 102 ú Sep 20/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
FAULT ISOLATION/MAINT MANUAL
P11 PANEL
FLT COMPT
P32
Component Location
Figure 102 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-31-00
ALL ú ú 12 Page 103 ú Sep 20/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
GALLEY WASTE ENCLOSURE - INSPECTION/CHECK
_________________________________________
1. General_______
A. This is a procedure to examine the galley waste enclosures on the airplane to make sure that each galley waste enclosure can contain a fire.
B. The galley waste enclosure is referred to as the enclosure in this procedure.
C. This is a general inspection procedure for each galley waste enclosure and galley cart.
TASK 25-31-00-206-002
2. Examine the Galley Waste Enclosure and Galley Cart__________________________________________________
A. Access
(1) Location Zone
200 Upper Half of Fuselage
B. Procedure
S 206-006
(1) To do a check on the waste chute lid, do the steps that follow:
(a)
Make sure the edges of the lid do not have damage.
(b)
Make sure the lid hinge is not loose or worn too much.
(c)
Make sure the lid operates smoothly and closes correctly on the chute opening.
(d)
Make sure the WASTE - NO CIGARETTE DISPOSAL placard is installed on the lid.
(e)
Make sure the CLOSE WHEN NOT IN USE placard is installed on the lid.
(f)
Make sure the clearance between the closed lid and the chute edge is not more than the maximum tolerance specified on the galley installation drawing.
S 206-007
(2) To do a check on the waste compartment and door, do the steps that follow:
(a)
Make sure the door hinge is not loose or worn too much.
(b)
Make sure the door edges do not have damage.
(c)
Make sure the door latch operates smoothly.
(d)
Make sure the door is tight when the door is closed and latched.
(e)
Make sure the door operates smoothly and closes correctly on the opening.
(f)
Make sure the clearance between the closed and latched door, and the enclosure is not more than the maximum tolerance specified on the galley installation drawing.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-31-00
ALL ú ú 01 Page 601 ú Sep 20/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
A-A B-B
Galley Waste Compartment Figure 601
E46833
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 AMM 飛機維護手冊 EQUIPMENT/FURNISHINGS 1(82)
