EFFECTIVITY BEJ ALL 45-10-00
Page 98.135
D633W101-BEJ Sep 05/2002
CMCS -MAINTENANCE ENABLE/DISABLE DIALOG BOX
General
The maintenance enable/disable dialog box lets the user enable or disable flight legs and the maintenance phase.
The maintenance enable/disable dialog box shows:
*
Dialog box title
*
Text box titles
*
Two text boxes
*
buttons.
Text Box Titles
The title of the upper text box is FLIGHT LEG TRANSITION ENABLE/DISABLE.
The title of the lower test box is MAINTENANCE PHASE ENABLE/DISABLE.
Text Boxes
The upper text box shows the status of the flight leg transition. Two possible messages show in the box.
The lower text box shows the status of the maintenance phase. This text box has two messages.
Buttons
Two buttons control the status of the flight leg transition.
Select LEG ENABLE to enable the flight leg transition. This selection is available only when the flight leg transition is disabled.
Select LEG DISABLE to disable the flight leg transition. This selection is available only when the flight leg transition is enabled.
Two buttons control the status of the maintenance phase.
Select PHASE ENABLE to enable the maintenance phase. This selection is available only when the maintenance phase is disabled.
Select PHASE DISABLE to disable the maintenance phase. This selection is available only when the maintenance phase is enabled.
Two buttons show at the bottom of the dialog box.
Select GO BACK to remove the dialog box and return to the previous screen.
Select HELP to show the help dialog box for the maintenance enable/disable dialog box. Help text for the dialog box must be in the CMCF AMI for HELP to show.
EFFECTIVITY BEJ ALL 45-10-00
Page 98.136
D633W101-BEJ Sep 05/2002
CMCS -MAINTENANCE ENABLE/DISABLE DIALOG BOX
EFFECTIVITY BEJ ALL 45-10-00
Page 98.137
D633W101-BEJ Sep 05/2002
CMCS -INPUT MONITORING MAIN MENU DIALOG BOX
General
Input monitoring is a tool which specially trained personnel use to check signals to the AIMS cabinets. These signals are:
*
32 bit ARINC 429 word
*
16 bit or 32 bit ARINC 629 word
*
Hard wired AIMS analog variable input
*
Hard wired AIMS analog discrete input
*
AIMS partition IMM signal of one, two, or four bytes.
The CMCF shows these two types of input monitoring displays on the MAT:
*
General input displays
*
Special input displays.
You use the general input displays to select and monitor up to eight input signals.
You use these special input displays to select four types of input monitoring displays:
*
Analog discrete display
*
Analog variable display
*
ARINC 629 full word string display
*
Input monitoring aliases display.
Input Monitoring Main Menu Dialog Box
The INPUT MONITORING MAIN MENU dialog box has:
*
Dialog box title
*
Exclusive selections
*
Buttons.
Exclusive Selections
Use an exclusive selection and the CONTINUE command selection to monitor one of these signal types:
*
General inputs
*
Analog discretes
*
Analog variables
*
ARINC 629 full word strings.
Buttons
The CONTINUE button becomes available when you make an exclusive selection.
Select CONTINUE to show the display for the exclusive selection.
Select GO BACK to remove the dialog box and return to the previous display.
Select HELP to show the help dialog box for the INPUT MONITORING MAIN MENU dialog box. Help text for the dialog box must be in the CMCF AMI for HELP to show.
EFFECTIVITY BEJ ALL 45-10-00
Page 98.138
D633W101-BEJ Sep 05/2002
CMCS -INPUT MONITORING MAIN MENU DIALOG BOX
EFFECTIVITY BEJ ALL 45-10-00
Page 98.139
D633W101-BEJ Sep 05/2002
CMCS -INPUT MONITORING GENERAL INPUT PAGE
General
The input monitoring general input page lets the operator set and dynamically monitor up to eight signals.
Enter the parameters with the keyboard to monitor the signals.
The display has this data:
*
Display title
*
Input monitoring groups
*
Scroll bar
*
Buttons.
Input Monitoring Groups
The display has eight input monitoring groups. Each group is numbered and has this data: 中國航空網(wǎng) www.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：777 AMM 飛機維護手冊 中央維護 Central Maintenance(52)
