5.1.3.3. FMS DESTINATION ARROW
The FMS destination arrow indicates the bearing of the FMS destination airport when no parts of the airport are visible. The FMS destination arrow is available in ARC and ROSE NAV modes.
The following indications are provided:
-
The bearing of the FMS destination airport with an arrow,
-
The ICAO airport code next to the arrow,
-
The distance to the FMS destination airport in the top right corner of ND.
Note: The FMS destination arrow aims at the reference point of the FMS destination airport. When the aircraft is near the FMS destination airport, the direction of the runway threshold may be significantly different from the direction of the reference point.
5.1.3.4. AIRPORT MAP
Flag The flight crew sets or removes flags along the taxi path with the Interactive Control Menu or the MAP DATA page of the Soft Control Panel. Flags are shared on both Captain and First Officer NDs.
Cross The flight crew sets or removes crosses along the taxi path with the Interactive Control Menu or the MAP DATA page of the Soft Control Panel. Crosses are shared on both Captain and First Officer NDs.
The flight crew can use flags as checkpoints to draw the taxiing path and crosses to identify forbidden taxiways.
AMDB elements
Runway elements
Taxiway elements
Apron elements
Parking stand elements
Labels
OANS identifies the following elements with a label: Taxiway
-Runways, -Stand lines, example -Taxiways, -Vertical structures,
-Parking stands, -Control towers.
Bridge symbol
The OANS depicts a bridge as follows.
5.1.3.5. APPROACHING RUNWAY INDICATION
When the aircraft approaches a runway, OANS provides an APPROACHING RUNWAY advisory on ND. In ARC or ROSE NAV mode, the APPROACHING RUNWAY advisory is NN X – MM Y (e.g. 04 L – 22 R).
-NN is the QFU on the left hand side,
-X is the lateral position of the runway NN (void, L, C or R),
-MM is the QFU on the right hand side,
-Y is the lateral position of the runway MM (void, L, C or R).
When approaching two runways (e.g. runway intersection), the APPROACHING RUNWAY advisory is composed of two lines and displayed as above:
-
The bottom line refers to the nearest runway,
-
The top line refers to the farthest runway.
In addition, the runway(s) designated by the APPROACHING RUNWAY advisory flash(es) in yellow on the airport map.
In PLAN mode, the APPROACHING RUNWAY advisory is RWY AHEAD: CHANGE MODE.
5.1.3.6. OANS MESSAGES
Airport Map
Message Color Triggering condition
PLEASE WAIT White When the OANS processing time (e.g. map loading) exceeds 1 second.
ARPT NOT IN ACTIVE F-PLN White In PLAN mode, when: -The displayed airport is not one of the airports entered into the FMS flight plan (departure, destination, alternates), and -The current FWS flight phase is neither APPROACH nor LANDING.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：getting to grips with surveillance(81)
