(2)
Access Panel
197KL Central Hydraulic Service Center
C. Remove the Fill Indicator (Fig. 401)
S 864-002
(1) Open these circuit breakers on the overhead panel, P11, and install DO-NOT-CLOSE tags:
(a)
11K19, HYDRAULICS QTY CTR
(b)
11K20, HYDRAULICS QTY LEFT
(c)
11K21, HYDRAULICS QTY RIGHT
S 014-003
(2)
Open the access door for the hydraulic service bay, 197KL to get access to the reservoir fill system (AMM 06-41-00/201).
S 034-004
(3)
Disconnect the electrical connector behind the fill indicator.
S 034-005
(4)
Remove the mounting screws.
(5)
Remove the indicator shield and the fill indicator.
S 024-006
TASK 29-18-03-424-007
3. Install the Reservoir Fill Indicator
____________________________________
A. References
(1)
AMM 06-41-00/201, Fuselage Access Door and Panels
(2)
AMM 12-12-01/301, Hydraulic Systems
(3)
AMM 24-22-00/201, Electrical Power
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
29-18-03
ALL ú ú 01 Page 401 ú May 28/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
AFT LEFT WING TO BODY FAIRING
SEE A FILL INDICATOR
NUT MOUNTING BRACKET
FILL
INDICATOR ELECTRICAL CONNECTOR
INDICATOR SHIELD
MOUNTING SCREWS (4 LOCATIONS)
SEE B
MOUNTING
BRACKET
FILL SELECTOR VALVE
INDEX MARK ON THE FRONT SHELL OF THE MOUNTING FRAME (ALIGN THE INDEX MARK WITH THE ZERO MARK ON THE DIAL FACE)
AFT LEFT WING TO BODY FAIRING A
INDICATOR SHIELD
SPACER
PLASTIC WASHERS
SCREW
METAL WASHERS
FRONT SHELL OF THE MOUNTING FRAME
REAR SHELL OF THE MOUNTING FRAME
MOUNTING SCREWS
B
Reservoir Fill Indicator Installation Figure 401
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
29-18-03
ALL ú ú 01 Page 402 ú Dec 20/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
B. Access
(1)
Location Zones
197 Wing to Body - Aft Lower Half (Left)
211/212 Control Cabin
(2)
Access Panel
197KL Central Hydraulic Service Center
C. Install the Fill Indicator (Fig. 401)
S 434-008
(1)
Put the mounting frame around the fill indicator.
S 434-009
(2)
Assemble the fill indicator, the mounting frame, and the indicator shield, with washers, spacers and screws.
S 424-010
(3)
Put the indicator assembly in its position on the mounting bracket and install nuts on the screws.
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 AMM 飛機(jī)維護(hù)手冊 液壓 CHAPTER 29 - HYDRAULIC POWER 2(35)
