NOTE 1 : If a 100-hr. inspection has been carried out during the last 3 months, do not perform the operations identified with a "0" unless the annual inspection replaces a 100-hr. inspection. For US registered aircraft, perform all operations.
AHAA
Validity : S / N 1 - 9999 05-20 01Page 221
(IA) JUN 01
ATA OPERATIONS Area INSPECTIONS
1st
25 hrs 50
hrs 100
hrs Major Ann. Other
32-30 10) Visually inspect the landing gear hydraulic system tubes for evidence of leaks and wear ; check the routing ; check the attach fittings and the unions for condition and interference. 200 X 500 hrs
32-30 11) Replace the landing gear actuating
cylinders. 700 30000
cycles
32-30 12) Visually inspect the 3 actuating cylinders and the attach fittings ; check for leaks and check the moving parts for evidence of wear or shock marks. 700 X X
32-30 Landing gear struts without grease nipples 700 X 500 hrs or
13) Remove the front part of the nose landing gear strut and remove the main landing gear struts. Thoroughly inspect the struts for excessive play, cracks, distortion and
evidence of corrosion. 1 year
Lubricate the inner flanks of the yokes, the axles and the ball joints - refer to the latest issue of SOCATA SB 45.
Install the struts - refer to 32-30-04 201, 32-30-03 201.
32-30 All 700 X X 0 NOTE 1
14) Visually inspect the nose landing gear and main landing gear struts for excessive play, cracks, distortion and evidence of
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址:TB 20 MAINTENANCE MANUAL 05 TIME LIMITS MAINTENANCE CHECKS TB20飛機維護手冊 05 時間限制維護檢查 1(75)