曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

57-30 36) Remove wing tip 517 (if not riveted), visually inspect for cracks and security - refer to 57-30-00 201. 500  
52-40 37) Remove and check condition of inspection doors 511,
512, 516 and (if installed) 515 - refer to 52-40-00 201. 500  
52-40 38) Remove and check condition of sealed inspection doors 500  
 513, 514 - refer to 52-40-00 201.   
57-30 39) Remove and visually inspect wing tip 617 (if not riveted) for cracks and security - refer to 57-30-00 201. 600  
52-40 40) Remove and check condition of inspection doors 611,
612, 616 and (if installed) 615 - refer to 52-40-00 201. 600  
52-40 41) Remove and check condition of sealed inspection doors 600  
 613, 614 - refer to 52-40-00 201.   

AIM
Validity : S / N 1 - 9999 05-20-05 (JA) Page 203
JUN 01
 

ATA "80A" MAJOR INSPECTION
COCKPIT AND FUSELAGE INSPECTION (AREA 200) AREA OTHER INSPECTION
PERFORMED
BY
53-00 COCKPIT AND FUSELAGE INSPECTION (AREA 200) 200  
53-00 1) Perform an overall visual inspection of area 200. 200  
11-00 2) Check installation and legibility of interior and exterior
placards and markings - refer to 11-20-00 1, 11-30-00 1. 200  
25-10 3) Visually inspect attaching hardware, connections and markings on flight control instruments. 200  
77-00 4) Visually inspect the attach fittings, the connections and markings of the engine indicating instruments - refer to 31-10-03 201. 200  
31-20 5) Check the clock and the chronometer for correct
operation (if installed). 200  
 Perform a calibration using an accurate external
instrument.   
31-50 6) Visually inspect the advisory panel, check for legibility, security, lug crimping, cable condition and routing ; test the indicator lights - refer to 31-50-01 201. 200  
25-10 7) Remove the covers forward of the instrument panel(s) and tilt the instrument panel(s). 200  
31-10 8) Check the instrument panels and the central pedestal for condition and security. 200  
74-10 9) Visually inspect the attach fittings and the magneto selector connections for security. 200  
23-10 10) Visually inspect the racks, radio sets and control units of the communication systems (if installed), check the
wirings for correct routing, security and interference. 200  
34-00 11) Visually inspect the racks, units and control units of the navigation systems (if installed), check attach fittings and wiring for routing and interference. 200  
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：TB 20 MAINTENANCE MANUAL 05 TIME LIMITS MAINTENANCE CHECKS TB20飛機維護手冊 05 時間限制維護檢查 2(21)