S 215-011
(9)
Make sure the wiper blade is on the windshield and that the blades do not go over the windshield seal.
S 865-012
(10)
Put the WIPER switch in the OFF position.
S 865-013
(11)
Remove electrical power, if it is not necessary (Ref 24-22-00).
TASK 30-42-00-825-005
3. Adjustment of Windshield Wiper System
_____________________________________
A. General
(1) This paragraph gives instructions to make sure the wiper system is correctly adjusted after you have done the Wiper Speed, Sweep, and Park Position and the Wiper Arm Pressure Adjustment/Tests.
B. Equipment
(1)
Counter (0-300 strokes per minute) - Commercially available
(2)
Spring scale - 0 to 20 pounds
(3)
Sealing gun - 6-inch length cartridge
(4)
Sealing compound cutting tool - hardwood or
plexiglass
(5)
Varnish brush - 1 or 2 inch
(6)
Spatula
(7)
Pad to prevent wiper arm from scratching
windshield
C. Consumable Materials
(1)
A00247 Sealing compound - BMS 5-95, Class B
(2)
B00083 Aliphatic Naphtha - TT-N-95
D. References
(1)
24-22-00/201, Electrical Power - Control
(2)
30-42-02/401, Windshield Wiper Motor/Converter
E. Access
(1) Location Zones
211 Control cabin - section 41 (Left)
212 Control cabin - section 41 (Right)
F. Prepare for Adjustment/Test
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
30-42-00
ALL ú ú 02 Page 502 ú Sep 20/94
A
757
MAINTENANCE MANUAL
S 865-049
WARNING: BEFORE YOU DO MAINTENANCE ON THE WINDSHIELD WIPER SYSTEM, OPEN
_______ THE WINDOW HEAT CIRCUIT BREAKERS IN THE STEPS THAT FOLLOW. IF THESE CIRCUIT BREAKERS ARE NOT OPEN, YOU CAN GET AN ELECTRICAL SHOCK IF YOU TOUCH THE WINDSHIELD.
(1) Open these circuit breakers on the right miscellaneous relay panel, P37, and attach DO-NOT-CLOSE tags:
(a)
37E3, WINDOW HTR 2L
(b)
37E4, WINDOW HTR 3L
(c)
37J2, WINDOW HTR 1R
S 865-018
(2) Open these circuit breakers on the miscellaneous electrical equipment panel, P70, and attach DO-NOT-CLOSE tags:
(a)
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 AMM 飛機(jī)維護(hù)手冊 防冰和排雨 CHAPTER 30 - ICE AND RAIN PROTECTION(132)
