C. Procedure
S 864-001
(1) To remove the left motor/converter (1), open this circuit breaker on the overhead panel, P11, and attach a DO-NOT-CLOSE tag:
(a) 11R13, WSHLD WIPER LEFT
Windshield Wiper Motor/Converter Installation
Figure 401
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
30-42-02
ALL ú ú 02 Page 401 ú Sep 20/93
A
757 MAINTENANCE MANUAL
(2) S 864-002To remove the right motor/converter (1), open this circuit breaker on the overhead panel, P11, and attach a DO-NOT-CLOSE tag: (a) 11R22, WSHLD WIPER RIGHT
(3) S 864-005Open these circuit breakers on the right miscellaneous relay panel, P37, and attach DO-NOT-CLOSE tags: (a) 37E3, WINDOW HTR 2L (b) 37E4, WINDOW HTR 3L (c) 37J2, WINDOW HTR 1R
(4) S 864-006Open these circuit breakers on the miscellaneous electrical equipment panel, P70, and attach DO-NOT-CLOSE tags: (a) 70A3, WINDOW HTR 2R (b) 70A4, WINDOW HTR 3R (c) 70C13, WINDOW HTR L
(5) S 034-007Remove the sealing compound from the heads of the wiper arm hub screws, the bolts, and the shaft tightening slot.
(6) S 034-008Remove the wiper arm (2) (AMM 30-42-03/401).
(7) S 034-009Remove the bolts (4).
(8) S 024-010Remove the motor/converter (1).
(9) S 034-011Remove the electrical connector from the side of the motor/converter (1).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
30-42-02
ALL ú ú 01 Page 402 ú Sep 20/93
A
757 MAINTENANCE MANUAL
TASK 30-42-02-404-012
3. Install the Motor/Converter (Fig. 401)
___________________________
A. Equipment
(1)
Sealing gun - 6-inch cartridge
(2)
Sealing compound cutting tool - hardwood or
plexiglass
(3)
Varnish brush - 1 or 2 inch
(4)
Non-metal Spatula
B. Consumable Materials
(1)
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 AMM 飛機維護手冊 防冰和排雨 CHAPTER 30 - ICE AND RAIN PROTECTION(142)
