30-21-04
(POP-OUT) INDICATOR (LEFT SIDE OF INLET ú
COWL) ú 01 Page 407 ú May 28/99
A
757 MAINTENANCE MANUAL
S 214-015
(5) Inspect the supply duct assembly and the shroud assembly (AMM 30-21-04/601).
TASK 30-21-04-024-033
3. Remove The Engine TAI Pressure Indicator________________________________________
A. Access
(1) Location Zones
413 No. 1 Power Plant
423 No. 2 Power Plant
B. Prepare to Remove the Engine TAI Pressure Indicator (Fig. 405)
S 034-034
(1)
Remove the screws that attach the access panel to the inlet cowl.
S 014-035
(2)
Remove the access panel.
C. Remove the Engine TAI Pressure Indicator (Fig. 405)
S 034-036
(1)
Disconnect the pipe from the pressure indicator.
S 034-037
(2)
Cut and discard the lockwire between the pressure indicator and the lock tab.
S 034-038
(3)
Release the nut and remove the pressure indicator.
S 024-039
(4)
ENGINES WITH SB 71-9850; Remove and keep the shim washer for use during the installation.
S 424-040
(5)
Install approved caps on all openings.
TASK 30-21-04-424-016
4. Install the Engine to TAI Ring Duct___________________________________
A. Reference
(1)
70-12-02/201, Fitting Vee-Bank Coupling Clamps
(2)
70-51-00/201, Torque Tightening Technique
(3)
71-11-04/201, Fan Cowl Panels
(4)
78-31-00/201, Thrust Reverser System
B. Access
(1) Location Zones
413 No. 1 Power Plant
423 No. 2 Power Plant
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. RB211-535E4 ENGINES WITH TAI DUCT BURST ú
30-21-04
(POP-OUT) INDICATOR (LEFT SIDE OF INLET ú
COWL) ú 01 Page 408 ú May 28/99
A
757
MAINTENANCE MANUAL
(2) Access Panels
413AL Engine Fan Cowl
423AL Engine Fan Cowl
C. Procedure
S 034-017
(1) Remove the caps from the openings.
S 424-018
CAUTION: YOU MUST BE CAREFUL TO NOT DAMAGE THE PISTON SEALS DURING
_______ INSTALLATION. THE SEALS ARE EASILY DAMAGED IF NOT HANDLED CAREFULLY.
(2)
Carefully install the supply duct assembly (2) (Fig. 404).
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 AMM 飛機維護手冊 防冰和排雨 CHAPTER 30 - ICE AND RAIN PROTECTION(72)
