(c)  
Make sure the software part numbers show on the FDAU display.

 NOTE: The part numbers will scroll across the display screen
____ since the part numbers are 10 digits and the display screen is only an 8-digit field.
  ú

 31-31-03
 ALL  ú ú 05 Page 212 ú Jan 28/02

A

757
MAINTENANCE MANUAL

 S 862-024
 (8) Do this task: Remove Electrical Power (AMM 24-22-00/201).
 TASK 31-31-03-402-025
 6. ACMS Data Output from the FDAU to an AlliedSignal PCMCIA Card
_____________________________________________________________
 A. General
 (1)  
This procedure tells you how to make a copy of ACMS data onto a personal computer memory card international association (PCMCIA) card.

 (2)  
You must format the PCMCIA card with your applicable instructions before you can make a copy of the ACMS data.

 B. Reference
 (1)  AMM 24-22-00/201, Electrical Power Control
 C. Access
 (1)  Access Panel
 119BL Main Equipment Center, E3-3

 D. Procedure
 S 862-026
 (1)
Do this task: Supply Electrical Power (AMM 24-22-00/201).

 S 012-027

 (2)  
Open the PCMCIA door on the front of the FDAU.

 S 202-028

 (3)  
Make sure the PCMCIA slots are empty.

 (a)  If the PCMCIA slots are not empty, make sure the IN PROG LED is off before you remove an existing card.
 S 412-029
 (4)
Install the load card into the left slot of the PCMCIA interface.

 S 862-030

 (5)  
Make sure the IN PROG LED light comes on after approximately 5 seconds.

 S 862-031

 (6)  
Make sure the XFER COMP LED does not blink at an approximately 1-second interval.

 NOTE: This indicates that there is not sufficient space on the
____ PCMCIA card. When this occurs, remove the PCMCIA card and install another PCMCIA card to complete the copy process.
  ú

 31-31-03
 ALL  ú ú 05 Page 213 ú Jan 28/02

A

757 MAINTENANCE MANUAL
 S 862-032
 (7)  Make sure the XFER FAIL LED does not come on.
 NOTE: This indicates that there is a failure during the copy
____
 process.

 S 862-033
 (8)  
Make sure the IN PROG LED light goes out when the copy process is complete.

 S 012-034

 (9)  
Push the eject button.

 S 022-035

 (10)
 Remove the PCMCIA card.

 S 862-036

 (11)
 Do this task: Remove Electrical Power (AMM 24-22-00/201).
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 AMM 飛機維護手冊 儀表 CHAPTER 31 - INSTRUMENTS 1(120)