曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Repairs and alterations are classified as either major or minor. 14 CFR part 43, appendix A, describes the alterations and repairs considered major. Major repairs or alterations shall be approved for return to service on FAA Form 337, Major Repair and Alteration, by an appropriately rated certificated repair station, an FAA certificated A&P mechanic holding an Inspection Authorization, or a representative of the Administrator. Minor repairs and minor alterations may be approved for return to service with a proper entry in the maintenance records by an appropriately certificated repair station or FAA certificated A&P mechanic.
For modifications of experimental aircraft, refer to the operating limitations issued to that aircraft. Modifications in accordance with FAA Order 8130.2, Airworthiness Certification of Aircraft and Related Products, may require the notification of the issuing authority.Airworthiness Directives (ADs)
A primary safety function of the FAA is to require correction of unsafe conditions found in an aircraft, aircraft engine, propeller, or appliance when such conditions exist and are likely to exist or develop in other products of the same design. The unsafe condition may exist because of a design defect, maintenance, or other causes. 14 CFR part 39, Airworthiness Directives (ADs), define the authority and responsibility of the Administrator for requiring the necessary corrective action. ADs are the means used to notify aircraft owners and other interested persons of unsafe conditions and to specify the conditions under which the product may continue to be operated. ADs may be divided into two categories:
1. Those of an emergency nature requiring immediate compliance prior to further flight.
2. Those of a less urgent nature requiring compliance within a specified period of time.
ADs are regulatory and shall be complied with unless a specific exemption is granted. It is the aircraft owner or operator’s responsibility to ensure compliance with all pertinent ADs. 14 CFR part 91, section 91.417 requires a record to be maintained that shows the current status of applicable ADs, including the method of compliance; the AD number and revision date, if recurring; the time and date when due again; the signature; kind of certificate; and certificate number of the repair station or mechanic who performed the work. For ready reference, many aircraft owners have a chronological listing of the pertinent ADs in the back of their aircraft maintenance records. Choosing a Balloon
Many companies manufacture balloons that are type-certificated by the FAA. A type-certificated balloon has passed many tests, has been approved by the FAA, and conforms to the manufacturer’s TCDS. Balloon size is rated by envelope volume with categories defined in metric units. Figure 2-16 illustrates the most popular size ranges in use today (volumes are provided in cubic meters, as well as cubic feet).
Advantages of Balloon Sizes
Different balloon sizes offer different advantages. The size of the balloon purchased should be determined according to planned use(s). Most pilots think smaller balloons are easier to handle, fly, and pack up. Bigger balloons use less fuel, operate cooler, and last longer. Higher elevations or hotter climates or passengers indicate a larger balloon. Balloon competitions and sport flying require a smaller balloon. [Figure 2-17]
2-15
50'
49'54K57'55'77K60'57'90K63'60'105K69'66'141KAX6AX7AX8AX8AX9
Figure 2-17. Comparison of balloon sizes.
Selecting a New or Used Balloon
The cost is the most obvious difference between new and used balloons. Some new pilots buy a used balloon to gain proficiency, and then purchase a new balloon when they have a better idea of what they want or need.
Prior to purchasing any used balloon, it is important to ensure that the balloon is airworthy, to avoid purchasing an aircraft which may be nearing, or perhaps past, its useful life. Most balloon envelopes are constructed of fabrics that last well into the 300–400 hour range, with some newer fabrics exceeding that life span. It would be prudent to have the balloon inspected by a reputable repair station or qualified inspector prior to purchase. Balloon Brands
The level of after sales service available—locally and from the manufacturer—is an important criterion in deciding which brand of balloon to purchase. Talk to local pilots and ask questions. How does the local balloon repair station feel about different brands? Do they stock parts for only one brand? Does the manufacturer ship parts and fabric for balloons already in the field, or do they reserve these parts and fabric for new production? Do they ground older model balloons for lack of materials while new balloons are being built?
There are other criteria that could be considered, such as altitude at which the balloon will be flying, climate, and interchangeability of components, to give some examples. Before making the final decision, talk to people with different kinds of balloons who do different kinds of flying. Crewing for different balloons is an excellent way to learn about balloons and can help in the decision on what first balloon to purchase.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：Balloon Flying Handbook(29)