曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Session A1b Metallic structures
Chair: Prof. B. Surowska (Lublin University of Technology), Dr L. J. Ruiz-Aparicio (ATI Allegheny Ludlum)
Invited Speaker Invited Speaker
A. Engleder, W. Koletzko (Eurocopter Germany)
Current Helicopter Composite Applications and its way ahead – with a short look back to the beginnings
13:20 Dr L. J. Ruiz-Aparicio, A. DeNoi, J. V. Mantione, R. Wendel, J. Smith, Dr T. D. Bayha (ATI Allegheny Ludlum)
Development of ATI 425® Titanium Alloy Sheet, Strip and Foil
Prof. A. Güemes (Polytecnic University of Madrid)
Fibre optics distributed sensing: Status and perspectives
13:40 Dr J. Adamus, Dr P. Lacki (Czestochowa University of Technology)
The most important aspects of sheet-titanium forming
Dr M. Heneczkowski , Prof.H.Galina, Dr M. Oleksy (Rzeszow University of Technology)
Fire resistant epoxy composites
14:00 U. Speetzen, L. Castellano (Makino GmbH)
The New Economic Feasibility of Titanium Machining
Mr R. Möller (Flow Europe GmbH)
Machining of Composites with Abrasive Waterjets
14:20 Dr T. Balawender, Prof. R. E. Sliwa (Rzeszow University of Technology)
A new concept of rivet proposed to use in aeronautical constructions
Dr M. Potoczek, Prof. R. Sliwa (Rzeszow University of Technology)
Metal-ceramic interpenetrating composites obtained by metal infiltration into gelcast alumina foams
14:40 W. Beck, W. G. Jung, S. Arends (FormTech GmbH)
Forming of Titanium Alloys
Dr P. Müller-Hummel (MAPAL Dr Kress KG)
New Economic Solutions for Drilling and Milling of CFRP and Low Force Drilling of CFRP/Titanium Stacks for Aeronautic Applications
15:00 F. Wildenberg (CMW)
On site machining (on an airport) of wings and fuselage of a twin jet with HEXAPODE CMW 380
Coffee break 15:20 Coffee break
Session A2a Life Cycle Support / NDT and SHM
Chair: Prof. J. Narkiewicz (Warsaw University of Technology)
Session A2b Simulation forum
Chair: Mr Yvan Radovcic (Samtech)
B. Neuner (AMETEK Programmable Power), M. van den Bergh (CNS Inc. – Poway)
Modern aircraft power system testing
16:00 Dr M. Hortmann
Simulation Driven Product Development with ANSYS Workbench
Dr M. Ehrmann (Dürr Systems GmbH)
Process planning and assembly structures in aircraft environments
16:20 S. Peck (VISTAGY, Inc.)
Enhancing the Composites Design-to-Manufacturing Process with FiberSIM(R) 2009
S. Vrignon, B. Pouilleau (euroscript International S.A.)
ILS as seen by an Army: The national French Air Force Library or the first Open Source based S1000D solution
16:40 M. Kürten, P. Block (CGTech Deutschland GmbH)
VERICUT Composite Programming & Simulation
M. Mäuseler (GfU Gesellschaft für Unternehmenslogistik mbH)
Requirements Engineering supports Life Cycle Management
17:00 A. Walter (aicas Allerton Interworks Computer Automated Systems)
Java for Safety Critical Applications
M. Cacciola, A. Gasparics, G. Megal, D. Pellicanò, F.C. Morabito
Model for Eddy Current testing of CFRPs
17:20 T. Baudach, Dr. S. Kleiner (engineering methods AG)
Knowledge Based Engineering using CATIA V5 for High Lift Device Design at Airbus
Dr P. Weinhold, Dr T. Schüßler (Innowep GmbH)
Mobile Measuring and Documentation of Visual Impression and Surface Topography
17:40 Dr A. Mete (MSC Software GmbH)
State of the art of composites material simulation
Conference reception 18:00 Conference reception
7
Second Day: 4rd November 2009 4th Int. Conference “Supply on the Wings”, 3 – 5 November 2009, Frankfurt
08:30 Check-in and morning coffee
Keynote lectures Chair: Albrecht Pfaff (MSC.Software GmbH )
09:00 Mr G. Avalle, L. Fossati, V. Sapienza (Alenia Aeronautica): Effects of the corrosion on the structural fatigue life and their management in the in-service ageing aircraft
09:30 Mr Marco Cecchini, Alexandre C. de Moura, Fabio R. Soares da Cunha (Embraer): Embraer at a glance, engineering tools for aircraft simulation
10:00 Coffee break
Session B1a Composite Structures
Chair: Dr Leslie Cohen (Hitco)
Session B1b Improved simulation
Chair: Albrecht Pfaff (MSC.Software GmbH )
Invited Speaker Invited Speaker
Dr C. Hühne, T. Ströhlein (DLR)
Door surround structures for next generation aeroplanes
10:45 F. Soares (Embraer), M Lopes de Oliveira e Souza (INPE)
Simulation of aircraft structures using non-linear analysis techniques
L. Cevolini (CRP Technology)
Cold Duct Fan
11:05 F. Rogin, F. Soares, G. Abumeri, Dr. F. Abdi (Alpha Star, Embraer), K. Nikbin (Imperial College)
Robust Design of Composite Wing Structure, a combined durability and reliability approach
Mr D. McCarville (Boeing)
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料1(34)