曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

receives the focus on the first field.
– The focus is clearly marked by a blue arrow between the
field label and the field entry. The label is marked with a
blue box.
– The field is composed of a label followed by the units used
and followed by the entry value.
– A field can be displayed in 3 different ways:
• No entry is possible, the parameter is written in plain 􀁣
• The entry is entered by the pilot, the entry area is a box 􀁤
• The entry is selected from a list of available options, the
entry area is a box with an arrow down to indicate a list 􀁥
– The Status Bar offers help to the pilot when a field receives
the focus.
AI/ST-F 15
Design Principles for Performance Modules
(3)
􀁺 Protection and Security
– All fields are protected against involuntary modification and
this protection is removed by typing the ENTER key.
– When the user changes any input parameter, the result
frame is emptied immediately.
– If the pilot entry is converted by the interface (e.g. unit
change, …), the pilot entry is displayed in between brackets
after the converted value.
AI/ST-F 16
Design Principles for Performance Modules
(4)
􀁺 Managing Error Entries
– Errors are managed at 4 different levels:
– Error level A
• validation of a discrete datum against available range
AI/ST-F 17
Design Principles for Performance Modules
(4)
􀁺 Managing Error Entries
– Errors are managed at 4 different levels:
– Error level A
• validation of a discrete datum against available range
– Error level A+
• validation of a datum against other field of the same
frame
Temperature range
checked against runway
condition
AI/ST-F 18
Design Principles for Performance Modules
(4)
􀁺 Managing Error Entries
– Errors are managed at 4 different levels:
– Error level A
• validation of a discrete datum against available range
– Error level A+
• validation of a datum against other field of the same
frame
– Error level B
• validation of data of a frame with respect to other
frames
AI/ST-F 19
Design Principles for Performance Modules
(4)
􀁺 Managing Error Entries
– Errors are managed at 4 different levels:
– Error level A
• validation of a discrete datum against available range
– Error level A+
• validation of a datum against other field of the same
frame
– Error level B
• validation of data of a frame with respect to other
frames
– Error level C
• validation of all data which can only be done by
executing a separate computation.
For example: Loading distribution outside CG envelope
AI/ST-F 20
Design Principles for Performance Modules
(5)
􀁺 Display of Results
– Differentiation of useable results from unusable ones.
– Unusable results are either:
• displayed in Magenta/Red when the maximum
permissible takeoff weight is lower than the actual
weight
• not provided and an error message explains the reason
of the failure
AI/ST-F 21
Design Principles for Performance Modules (5)
􀁺 Display of Results
– Differentiation of useable results from unusable ones.
– Usable results are displayed in numerical and graphical
format (when applicable)
AI/ST-F 22
Coming Soon
In Flight Module
34000
35000
36000
37000
38000
39000
60000
61000
62000
63000
64000
65000
66000
67000
68000
Weight (1000 x kg)
Pressure Altitude (ft)
MAX REC ALT (ft) MAX REC CRZ ALT (ft)
MAX CLB ALT (ft) OPTIMUM ALT (ft)
68038
66997 Weight (kg) 61498
66836 61330
Landing
In Flight
MEL
AI/ST-F 23
Coming Soon - Landing module
􀁺 Dispatch Condition
– Required Landing Distance
– Approach climb limiting climb
􀁺 In-Flight Condition
– Normal or in-flight failure affecting approach/landing
performance
– Actual landing distance
• Dry, Wet, contaminated runway
• With/without Autobrake
• with/without Autoland
– Approach climb limiting weight
– Calculation of VAPP in case of in-flight failure
AI/ST-F 24
Coming soon - In-Flight module
􀁺 A complement to the FMS performance
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料1(73)