曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Enables the student to navigate through the F100-PW-220/229
Intermediate Maintenance Manual Set (IMMS) and use it within the
maintenance environment. This course prepares the student for
the Intermediate Maintenance and Intermediate Maintenance
On-the-Job-Training (OJT) courses.
F100 Engine Systems and Troubleshooting (10 Days)
Class Size: 4 to 12
Course Code: 1041 F100-PW-220
1051 F100-PW-229
Provides comprehensive and in-depth training of F100 engine
systems operation, diagnostic equipment operation, troubleshooting
techniques and line replacement unit (LRU) maintenance.
F100 Borescope/Fiberscope Inspection (5 Days)
Class Size: 2 to 6
Course Code: 1036 F100-PW-220
1037 F100-PW-229
Provides knowledge and experience to perform F100 engine
borescope/fiberscope inspections. The course consists of
classroom presentations and practical hands-on experience.
F100 Engine Blade Blending (1 day)
Class Size: 2 to 6 Course Code: 1015
Provides general knowledge of inspections and blending
techniques for Pratt & Whitney military engine blades. The course
consists of support equipment identification, definition of blade
damage and proper inspection and blending techniques.
F100 Intermediate Maintenance (55 Days)1
Class Size: 4 to 6
Course Code: 1019 F100-PW-220
1052 F100-PW-229
Working as team members, students will disassemble, inspect
and reassemble the engine and/or associated modules using
F100-unique special tooling, technical manuals and precision
measuring equipment.
F100 Engine Series Courses
17
F100 Intermediate Maintenance OJT (59 Days)2
Class Size: 4 to 6
Course Code: 1020 F100-PW-220
1056 F100-PW-229
The course is designed to enhance the knowledge and experience
gained in the Intermediate Maintenance course by providing further
knowledge and experience performing those tasks most frequently
encountered in an actual maintenance environment. Students work
as a team, making necessary decisions about the requirements and
procedures for a given situation. The instructor(s) serves in an
advisory/observer capacity during the training period. Students
will be evaluated on the proficiency level attained during training.
F100 Intermediate Test Operator (5 Days)1
Class Size: 4 to 6
Course Code: 1042 F100-PW-220
1053 F100-PW-229
Designed for customers already operating the engine.
Enables the student to install and remove an F100 engine on
the test stand, conduct a run of the engine and perform pre- and
post-run inspections of the engine and test stand.
F100 Intermediate Test Operator (10 Days)
Class Size: 4 to 6
Course Code: 1043 F100-PW-220
1054 F100-PW-229
Enables the student to install and remove an F100 engine on
the test stand, conduct a run of the engine and perform pre- and
post-run inspections of the engine and test stand.
F100 Engine Monitoring System Component Intermediate
Maintenance Repair (10 Days)
Class Size: 2 to 4
Course Code: 1070
Provides a basic knowledge and the practical experience required
to perform intermediate-level maintenance repair of F100 enginemonitoring-
system components.
F100 Depot Maintenance1, 2
Class Size: 4 to 6
Course Code: F100-PW-220 F100-PW-229
Engine (includes all courses below) (47 Days) 1034 1057
Fan Module (5 Days) 1023 1095
Core Module (15 Days) 1022 1038
Rear Compressor Drive Turbine (3 Days) 1027 1039
Fan Drive Turbine Module (5 Days) 1025 1064
Gearbox (3 Days) 1048 1100
Augmentor (4 Days) 1045 1103
Working as a team, students will disassemble, inspect
and reassemble the engine and/or associated modules
using F100-unique tooling, technical manual and precision
measuring equipment.
F100 Depot Maintenance OJT1, 2
Class Size: 4 to 6
Course Code: F100-PW-220 F100-PW-229
Engine (includes all courses below) (67 Days) 1035 1059
Fan Module (8 Days) 1024 1088
Core Module (20 Days) 1079 1089
Rear Compressor Drive Turbine (5 Days) 1029 1102
Fan Drive Turbine Module (8 Days) 1026 1090
Gearbox (5 Days) 1049 1101
Augmentor (6 Days) 1047 1104
This course enhances the Depot Maintenance course with the
opportunity to gain further knowledge and experience performing
those tasks most frequently encountered in an actual maintenance
environment. The students work as a team, making necessary
decisions about the requirements and procedures for a given
situation. The instructor(s) serves in an advisory/observer capacity
during the training period. Students will be evaluated on the
proficiency level attained during this training period.
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料29(2)