曝光臺(tái) 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費(fèi)者

Z1-Connect
26
Fixed detachable
prosthetic application
conical head
Indirect transfer for
conical head
Direct transfer for
conical head
Castable bar conical
head
Spherical attachment
PROSTHETIC PROTOCOL
Fixed detachable prosthetic
application with
plastic castable screwretained
abutment
Zirconnect
27
Fixed detachable prosthetic
application with
gold cast-to screwretained
abutment with
plastic sleeve
PROSTHETIC PROTOCOL
Z1-Connect
28
Direct or indirect
transfer
Plastic castable or
cast-to gold abutment
Plastic castable
or cast-to gold
abutment
Direct or indirect
conical transfer
Conical base (+ healing cap)
or spherical base
Conical base
(+ healing cap)
Direct or indirect
conical transfer
Conical or spherical
analog
Conical
Analog
Plastic castable or
cast-to gold copping
Cap
or O’ring
Plastic castable or
cast-to gold copping
Direct or indirect
transfer
Cemented crown and bridge
prosthetic application
Fixed detachable
prosthetic application
Overdenture
prosthetic application
Titanium abutment
0°,15°,25°
MCB
0°,15°,25°
Analog Analog
Zirconnect CONNECT CONSPECTUS
29
System with internal octagonal connection
Implants and surgical components
Surgical protocol
Prosthetic components
Prosthetic accessories
Prosthetic protocol
p 31
p 33
p 35
p 39
p 41
CONNECT SYSTEM
Connect
30
CONNECT SYSTEM
conic-shaped screw implants
COMMENTS : ZT-Hybrid body surface : sandblasted and acid-etched with a machined collar.
Every implant is delivered with a surgical cover screw.
Titanium Connect implant - diameter 4 mm
Titanium Connect implant - diameter 5 mm
Titanium Connect implant - diameter 3,5 mm
L : 8 mm
X308
L : 10,5 mm
X310
L : 13 mm
X313
L : 15,5 mm
Ø 3,5 mm X315
L : 8 mm
X408
L : 10,5 mm
X410
L : 13 mm
X413
L : 15,5 mm
Ø 4 mm X415
L : 8 mm
X508
L : 10,5 mm
X510
L : 13 mm
X513
L : 15,5 mm
Ø 5 mm X515
Zirconnect IMPLANTS AND SURGICAL COMPONENTS
31
COMPOSANTS
CHIRURGICAUX
Healing screw - Height 5 mm
Healing screw - Height 3 mm
COMMENTS : The healing screws are graduated every 2 mm to enable to evaluate gingival thickness.
Healing screw - Height 7 mm
For implants
Ø 5 mm
HO-VT550
For implants
Ø 4 mm
HO-VT450
For implants
Ø 3,5 mm
Height : 5 mm HO-VT350
For implants
Ø 5 mm
HO-VT570
For implants
Ø 4 mm
HO-VT470
For implants
Ø 3,5 mm
Height : 7 mm HO-VT370
For implants
Ø 5 mm
HO-VT530
For implants
Ø 4 mm
HO-VT430
For implants
Ø 3,5 mm
Height : 3 mm HO-VT330
Connect
IMPLANTS AND SURGICAL COMPONENTS
32
SURGICAL PROTOCOL
6a - Take the screwtool
for the contra-angle and
clamp the implant inside its
housing. Maintain the contraangle
up when the implant is
moved to the surgical site
7a - Insert the implant into the
prepared site until the end of
the most coronal microthread
Note : It is recommended not
exceed a tightening torque
above 50 Ncm
8a - Vertically remove the
contra-angle and the contraangle
screwtool
6b - Take the screwtool and
clamp the implant inside its
housing. Maintain the screwtool
up when the implant is
moved to the surgical site
7b - Begin to manually
insert the implant into the
prepared site
Note : It is recommended
not exceed a tightening
torque above 50 Ncm
8b - Complete the implant
insertion with the ratchet
wrench until complete burying
on bone
Drilling
protocol
Note : The implant choice (diameter and
length) will be done thanks to the T.B.R.®
Zirconnect ® scanora and X-ray template
(notice of the 1.0 mm drills point when you
are evaluating the available bone height).
1 - Initiate crestal bone
penetration with the round
pilot drill
2 - Use the stop drill #1
adapted to the implant length
Ratchet wrench
protocol
Contra-angle
protocol
Zirconnect
33
SURGICAL PROTOCOL
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料40(75)