曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

The MCDU then displays “REVISIONS NOT STORED”.
AIRCRAFT STATUS PAGE
Applicable to:
The system automatically displays this page at power up, but the pilot may also call it up by pressing
the DATA key on the MCDU console.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A318/A319/A320/A321 FLEET DSC-22_20-50-10-25 P 55/104
FCOM 19 AUG 10
TITLE AIRCRAFT TYPE
[ 1L ] ENGINE TYPE The system uses this to calculate predictions.
Note: When the same performance database is used for various aircraft configurations, the
aircraft type displayed may differ from the actual aircraft.
[ 2L ] ACTIVE DATABASE The validity period and part number are displayed in large font.
[ 3L ] SECOND DATABASE The validity period is displayed in small font. The pilot can press the 3L key to
switch to the second database as the active database.
CAUTION Cycling the database erases the primary and secondary flight plans, as well as the
stored data. The flight crew must never do this in flight.
[ 5L ] CHG CODE This field allows the entry of a code to change the IDLE and/or PERF factor,
displayed in 6L. It is displayed in the PREFLIGHT and DONE phases. The label
is displayed in small white font. The brackets, or the entered value, is displayed in
large blue font.
[ 6L ] IDLE/PERF These factors can only be modified while the aircraft is on ground. If no value has
been entered, the databases default value is displayed in small font. Some aircraft
require that the IDLE/PERF factor be adjusted.
To do so, the crew may use the following procedure :
Enter “ARM” in the CHG CODE ‐ line's [5L] brackets.
‐ Write the new IDLE/PERF factor in the scratchpad.
‐ Enter this new factor in line [6L].
The entered factor is displayed in large green font. The airline may change the
ARM code.
[4R] STORED This field displays pilot-stored data in a large green font. The field is blank, if no data
is stored. (The airline can choose to have this data automatically erased at the done
phase).
To be continued on next page
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A318/A319/A320/A321 FLEET DSC-22_20-50-10-25 P 56/104
FCOM 19 AUG 10
Continued from previous page
[5R] DELETE ALL Pressing this key changes the label to amber CONFIRM DELETE ALL. Pressing
this key a second time deletes all pilot-stored data, except data that is part of the
active and secondary flight plans.
[6R] STATUS/XLOAD This prompt gives access to the P/N STATUS and P/N XLOAD pages.
P/N XLOAD PAGE
Applicable to:
This page allows the crossloading of all databases or configuration files' part numbers which are
different between both sides. Crossloading from this page avoids reviewing each individual P/N
STATUS page.
TITLE P/N XLOAD
[1L] FMS1 UPDATE : FMS1 can be loaded on the right side MCDU.
FMS2 UPDATE : FMS2 can be loaded on the left side MCDU
[4L] START XLOAD : This blue prompt is displayed, only if the system detects a difference between
both sides' part numbers.
FMS1/FMS2 IDENTICAL : Displayed in green, when there is no difference between both sides'
part numbers.
Line 5 FM1 TO FM2 or FM2 TO FM1 : Indicates the crossloading direction. This line is not displayed
when there is no difference between both side part numbers.
[5L] A/C STATUS : This white prompt is displayed, when there is no crossloading in process. It gives
access to the A/C STATUS page.
MM : SS MIN REMAINING : Indicates the time remaining for crossload completion, when a
crossload is in process.
[6L] PREV PAGE The pilot presses this key to return to the A/C STATUS page.
[6R] NEXT PAGE Pressing this key calls up the next P/N XLOAD page.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A318/A319/A320/A321 FLEET DSC-22_20-50-10-25 P 57/104
FCOM 19 AUG 10
P/N STATUS PAGES
Applicable to:
These pages allow reviewing and crossloading the following databases and configuration files
between both FMS :
Page ‐ 2 FMS SOFTWARE part numbers
‐ Page 3 NAV DATA BASE part numbers
‐ Page 4 FM AIRLINE CONFIG part numbers
‐ Page 5 FM OPTIONS CONFIG part numbers
‐ Page 6 PERF DATA BASE part numbers
‐ Page 7 FLIGHT TEST DATA BASE
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320機組操作手冊FLIGHT CREW OPERATING MANUAL 1(146)