曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費(fèi)者

FCOM 19 AUG 10
LEFT COLUMN
AUTO
Line 1 : Uplink messages related to flight plan INIT data are automatically
printed when received.
Line 2 : Uplink messages related to takeoff data are automatically printed
when received.
* YES (blue)
Line 3 : Uplink messages related to wind data are automatically printed
when received.
* NO (blue) When “NO”, preceded by a star, is displayed in front of a line, automatic printing
is deselected. The pilot can reactivate it by pressing the left key of the line.
NO (without a star) Automatic printing is internally deactivated for the data of the line. The pilot
cannot reactivate it manually.
Blank The ACARS function is not available for this line. Uplink messages can neither
be received nor automatically printed.
RIGHT COLUMN
MANUAL Displays the status of the manual printing capability of the active data (and not of
the ACARS uplink data).
Pressing the right keys prints the following active data :
Line 1 : Active flight plan init data
Line 2 : Active takeoff data
PRINT * (amber)
Line 3 : Active wind data
If the star is not displayed, printing is not possible.
When the key is pressed, the star is removed until the data is printed.
[ 6L ] RETURN Pressing this key reverts the display to the DATA INDEX page.
[ 6R ] ACARS FUNCTION Pressing this key reverts the display to the ACARS FUNCTION
page.
PRINT FUNCTION PAGE 2/2
This page describes the printing capabilities of the reports displayed on lines 1 to 4.
LEFT COLUMN
AUTO (white)
Line 1 : The PREFLIGHT report is automatically printed at engine start.
Line 2 : The INFLIGHT report is automatically printed at takeoff.
* YES (blue)
Line 3 : The POSTFLIGHT report is automatically printed at engine
shutdown.
* NO (blue) The report, displayed on the line, is not printed automatically. The pilot can
reactivate the function by pressing the left key of the line.
NO (without a star) Automatic printing is internally deactivated for the report. The pilot cannot
reactivate it.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A318/A319/A320/A321 FLEET DSC-22_20-50-10-25 P 70/104
FCOM 19 AUG 10
RIGHT COLUMN
MANUAL Pressing a right key prints the report displayed on the line.
PRINT * If the star is not displayed, printing is not possible.
When the key is pressed, the star is removed until the report is printed.
For the PREFLIGHT, INFLIGHT and POSTFLIGHT reports, only one type of
report is available for printing at any given time, depending on the current flight
phase.
For the SEC F-PLN report, the print selection start is only displayed if a
secondary flight plan exists.
ACARS FUNCTION PAGE
Applicable to:
The ACARS FUNCTION pages display the functions enabling the crew to send manual requests or
reports to the ground.
All functions, displayed on pages 1 and 2, may be inhibited through a pin program.
The ACARS/PRINT FUNCTION prompt is displayed on the DATA INDEX page 1/2. Pressing this key
displays the PRINT FUNCTION page from which the ACARS FUNCTION page can be accessed.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A318/A319/A320/A321 FLEET DSC-22_20-50-10-25 P 71/104
FCOM 19 AUG 10
ACARS FUNCTION PAGE 1
Applicable to:
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A318/A319/A320/A321 FLEET DSC-22_20-50-10-25 P 72/104
FCOM 19 AUG 10
TITLE ACARS FUNCTION 1/2 in white
Line 1 F-PLN INIT REQ* Pressing this key sends a request for flight plan to the ground (downlink message)
The INIT REQUEST prompt of the INIT A page provides the same function.
Line 2 TO DATA REQ* Pressing this key sends a request for takeoff data.
Displayed in the DONE and PREFLIGHT phases.
The TO DATA REQUEST prompt of the UPLINK TO DATA REQ page provides the
same function.
Line 3 WIND DATA REQ* Pressing this key sends a request for wind data.
The WIND REQUEST prompt of the CLIMB, CRUISE, and DESCENT WIND pages
provides the same function.
Note: If “REQ” is not followed by a star, the request cannot be sent (downlink message).
When a function (line 1 or 2 or 3) is deactivated internally, the corresponding line is blank.
[ 6L ] RETURN The pilot presses this key to make the display revert to the DATA INDEX page.
[ 6R ] PRINT FUNCTION The pilot presses this key to access the PRINT FUNCTION page. (Refer to
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320機(jī)組操作手冊FLIGHT CREW OPERATING MANUAL 1(151)