TASK 05-24-30-200-002
Zonal Inspection of the Area of the Fan and the Accessory Gearbox
1.
Reason for the Job
__________________
Refer to the MPD TASK: ZL-435-01
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 2 m (6 ft. 7 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
71-13-00-010-040 Opening of the Fan Cowl Doors
71-13-00-410-040 Closing of the Fan Cowl Doors
05-24-30-991-001-A Fig. 601
05-24-30-991-002-A Fig. 602
05-24-30-991-003 Fig. 603
05-24-30-991-004 Fig. 604
3. Job Set-up
__________
Subtask 05-24-30-010-051
A. Get Access R (1) Put an access platform in position at zones 435 and 445.
(2) Open the fan cowl doors. (Ref. TASK 71-13-00-010-040) (Ref. Fig. 601/TASK 05-24-30-991-001-A, 602/TASK 05-24-30-991-002-A) 437AL, 438AR (Ref. Fig. 603/TASK 05-24-30-991-003, 604/TASK 05-24-30-991-004) 447AL, 448AR
4. Procedure
_________
Subtask 05-24-30-210-051
A. Inspection
R R (1) Do a general visual inspection of the area of the fan case and the accessory gearbox.
R (2) Make sure that there are no signs of corrosion, cracks or damage.
(3) Make sure that all the installations (wiring, ducting, piping) are attached correctly.
5. Close-up________
Subtask 05-24-30-410-051
A. Close Access
(1) Close the fan cowl doors. (Ref. TASK 71-13-00-410-040) 437AL, 438AR 447AL, 448AR
(2) Remove the access platform(s).
TASK 05-24-30-200-003
Zonal Inspection of the Fan and the Engine Cowling
1.
Reason for the Job
__________________
Refer to the MPD TASK: ZL-437-01
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 2 m (6 ft. 7 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
71-13-00-010-040 Opening of the Fan Cowl Doors
71-13-00-410-040 Closing of the Fan Cowl Doors R 05-24-30-991-001-A Fig. 601 R 05-24-30-991-002-A Fig. 602
05-24-30-991-003 Fig. 603
05-24-30-991-004 Fig. 604
3. Job Set-up
__________
Subtask 05-24-30-010-052
A. Get Access
(1)
Put an access platform in position at the zones 437 and 447.
(2)
Open the fan cowl doors. (Ref. TASK 71-13-00-010-040)
R (Ref. Fig. 601/TASK 05-24-30-991-001-A, 602/TASK 05-24-30-991-002-A) 437AL, 438AR (Ref. Fig. 603/TASK 05-24-30-991-003, 604/TASK 05-24-30-991-004) 447AL, 448AR
4. Procedure
_________ Subtask 05-24-30-210-052
A. Inspection
(1)
Do a general visual inspection of the fan and the engine cowling.
(2)
Make sure that there are no signs of corrosion, cracks or damage.
(3)
Make sure that all the installations (wiring, ducting, piping) are attached correctly.
5. Close-up
________ Subtask 05-24-30-410-052
A. Close Access
(1)
Close the fan cowl doors. (Ref. TASK 71-13-00-410-040) 437AL, 438AR 447AL, 448AR
(2)
Remove the access platform(s).
ZONAL INSPECTION : ENGINE THRUST REVERSER AND EXHAUST SECTION
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 時間限制/維護檢查 3(68)
