B. Get Access
 (1) Put an access platform in position.
 (2) Remove the access panels 533AT and 633AT. R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
 (Ref. Fig. 601/TASK 05-25-30-991-001)
 **ON A/C 301-399,

 (Ref. Fig. 601A/TASK 05-25-30-991-001-A)
 **ON A/C ALL

 4. Procedure
_________
 Subtask 05-25-30-210-052

 A. Inspection
 (1)
 Do a general visual inspection of the flap track No. 4 and the related fairing.

 (2)
 Make sure that there are no signs of corrosion, cracks or damage.

 (3)
 Make sure that all the installations are attached correctly.

 5. Close-up
________
 Subtask 05-25-30-410-052

 A. Close Access R (1) Install the access panels 533AT and 633AT.
 (2) Remove the access platform(s).
 Subtask 05-25-30-866-055

 B. Aircraft Maintenance Configuration
 (1) Fully retract the flaps (Ref. TASK 27-50-00-866-009).

 TASK 05-25-30-200-004

 Zonal Inspection of the Wing Tip
 1.
 Reason for the Job

__________________
 Refer to the MPD TASK: ZL-534-01

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 4 m (13 ft. 1 in.)
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
05-25-30-991-002 Fig. 602
 3. Job Set-up
__________ Subtask 05-25-30-010-053
 A. Get Access
 (1)
 Put an access platform in position.

 (2)
 Remove the access panels 534AB, 534AL, 534BL 634AB, 634AR, 634BR. (Ref. Fig. 602/TASK 05-25-30-991-002)

 4. Procedure
_________ Subtask 05-25-30-210-053
 A. Inspection
 (1)
 Do a general visual inspection of the wing tip.

 (2)
 Make sure that there are no signs of corrosion, cracks or damage.

 1EFF : ALL 1 05-25-30Page 612 1 1 May 01/04R 1 1 1CES 1

 Access Panels of the Wing Tip Figure 602/TASK 05-25-30-991-002
 1EFF : 1 1R 1CES  ALL  1 11 1 05-25-30 Page 613 May 01/04

 (3) Make sure that all the installations (wiring) are attached correctly.

 5. Close-up
________ Subtask 05-25-30-410-053
 A. Close Access
 (1)
 Install the access panels 534AB, 534AL, 534BL, 634AB, 634AR, 634BR.

 (2)
 Remove the access platform(s).

 1EFF : ALL 1 05-25-30Page 614 1 1 May 01/04R 1 1 1CES 1

 TASK 05-25-30-200-005

 Zonal Inspection of the Flap Track No. 2 and Fairing WARNING : DO NOT EXTEND THE SLATS AND FLAPS WHEN THE THRUST REVERSER COWLS ARE
_______
 DEPLOYED IN THE 45 DEG. POSITION.

 1.
 Reason for the Job

__________________
 Refer to the MPD TASK: ZL-531-02

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE  QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific  access platform 3 m (9 ft. 10 in.)
 B. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
27-50-00-866-008 Extension of the Flaps on the Ground 27-50-00-866-009 Retraction of the Flaps on the Ground 57-55-11-000-001 Removal of the Flap Track Fairings Nos. 2, 3 and 4 57-55-11-000-004 Removal of the Flap Track Fairings Nos. 2, 3 and 4 57-55-11-400-001 Installation of the Flap Track Fairings Nos. 2, 3 and
 4
 57-55-11-400-004  Installation of the Flap Track Fairings Nos. 2, 3 and 4

R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
 05-25-30-991-001 Fig. 601
 **ON A/C 301-399,

 05-25-30-991-001-A  Fig. 601A

 **ON A/C ALL

 3. Job Set-up
__________
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊 AMM 時間限制/維護(hù)檢查 3(75)