A. Aircraft Maintenance Configuration
 (1) Fully extend the flaps (Ref. TASK 27-50-00-866-008). R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
 Subtask 05-25-30-010-054
 B. Get Access
 (1)
 Put an access platform in position.

 (2)
 Remove the access panels (Ref. TASK 57-55-11-000-001):

 (Ref. Fig. 601/TASK 05-25-30-991-001)
 531AB, 531AL, 531AR,
 531AT, 531BB, 531CB,
 531DB,
 631AB, 631AL, 631AR,
 631AT, 631BB, 631CB,
 631DB.

 **ON A/C 301-399,
 Subtask 05-25-30-010-054-A
 B. Get Access
 (1)
 Put an access platform in position.

 (2)
 Remove the access panels (Ref. TASK 57-55-11-000-004):

 (Ref. Fig. 601A/TASK 05-25-30-991-001-A)
 531AL, 531AR, 531AT,
 531CB, 531DB, 531EB,
 531FB,
 631AL, 631AR, 631AT,
 631CB, 631DB, 631EB,

 631FB.

 **ON A/C ALL
 4. Procedure
_________
 Subtask 05-25-30-210-054

 A. Inspection
 (1)
 Do a general visual inspection of the flap track No. 2 and the related fairing.

 (2)
 Make sure that there are no signs of corrosion, cracks or damage.

 (3)
 Make sure that all the installations are attached correctly.

 5. Close-up
________ R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
 Subtask 05-25-30-410-054
 A. Close Access
 (1)
 Install the access panels (Ref. TASK 57-55-11-400-001): 531AB, 531AL, 531AR, 531AT, 531BB, 531CB, 531DB, 631AB, 631AL, 631AR, 631AT, 631BB, 631CB, 631DB.

 (2)
 Remove the access platform(s).

 **ON A/C 301-399,

 Subtask 05-25-30-410-054-A
 A. Close Access 
R R  (1) Install the access panels (Ref. TASK 57-55-11-400-004): 531AL, 531AR, 531AT, 531CB, 531DB, 531EB, 531FB, 631AL, 631AR, 631AT, 631CB, 631DB, 631EB, 631FB.
 (2) Remove the access platform(s).
 **ON A/C ALL
 Subtask 05-25-30-866-057
 B. Aircraft Maintenance Configuration 
R  (1) Fully retract the flaps (Ref. TASK 27-50-00-866-009).

 TASK 05-25-30-200-006

 Zonal Inspection of the Flap Track No. 3 and Fairing WARNING : DO NOT EXTEND THE SLATS AND FLAPS WHEN THE THRUST REVERSER COWLS ARE
_______
 DEPLOYED IN THE 45 DEG. POSITION.

 1.
 Reason for the Job

__________________
 Refer to the MPD TASK: ZL-532-02

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE  QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific  access platform 3 m (9 ft. 10 in.)
 B. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
27-50-00-866-008 Extension of the Flaps on the Ground 27-50-00-866-009 Retraction of the Flaps on the Ground 57-55-11-000-001 Removal of the Flap Track Fairings Nos. 2, 3 and 4 57-55-11-000-004 Removal of the Flap Track Fairings Nos. 2, 3 and 4 57-55-11-400-001 Installation of the Flap Track Fairings Nos. 2, 3 and
 4
 57-55-11-400-004  Installation of the Flap Track Fairings Nos. 2, 3 and 4

R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
 05-25-30-991-001 Fig. 601
 **ON A/C 301-399,

 05-25-30-991-001-A  Fig. 601A **ON A/C ALL

 3. Job Set-up
__________
 Subtask 05-25-30-866-058

 A. Aircraft Maintenance Configuration
 (1) Fully extend the flaps (Ref. TASK 27-50-00-866-008). R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
 Subtask 05-25-30-010-055
 B. Get Access
 (1)
 Put an access platform in position.

 (2)
 Remove the covers:

 (Ref. Fig. 601/TASK 05-25-30-991-001) 532AL, 532AR, 532AT, 532DB, 632AL, 632AR, 632AT, 632DB (Ref. TASK 57-55-11-000-001).

 (3)
 Remove the flap track fairings:
 532AB, 532BB, 532CB,
 632AB, 632BB, 632CB
 (Ref. TASK 57-55-11-000-001).

 **ON A/C 301-399,
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 時間限制/維護檢查 3(76)