3.
 Job Set-up

__________
 Subtask 05-28-00-869-050

 A. Not Applicable.
 4. Procedure
_________
 Subtask 05-28-00-210-050

 A. Inspection
 (1)
 Do a general visual inspection of the doors from the ground during the aircraft walkaround.

 (2)
 Make sure that there are no signs of corrosion, cracks or damage.

 ZONAL INSPECTION : AVIONICS COMPARTMENT DOORS (FORWARD AND LATERAL)___________________________________________________________________ INSPECTION/CHECK________________
 TASK 05-28-10-200-001 
R  Zonal Inspection of Forward Avionics Compartment Door
 1. Reason for the Job__________________
 Refer to the MPD TASK: ZL-811-01
 2. Job Set-up Information______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific  access platform 1.80 m (5 ft. 11 in.)
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R R  52-41-00-010-002 52-41-00-410-002 05-28-10-991-001  Open the Avionics Compartment Doors for Access Close the Avionics Compartment Doors after AccessFig. 601
 3. Job Set-up__________
 Subtask 05-28-10-010-050
 A. Get Access
 (1) Put an access platform in position at the zone 811. 
R R  (2) Open the forward avionics compartment door 811, (Ref. TASK 52-41-00-010-002). (Ref. Fig. 601/TASK 05-28-10-991-001)

R Avionics Compartment Left Side Door and Forward Door Figure 601/TASK 05-28-10-991-001
 1EFF : ALL 1 05-28-10Page 602 1 1 Nov 01/03 1 1 1CES 1

 4. Procedure
_________

 Subtask 05-28-10-210-050
 A. Inspection 
R R  (1) Do a general visual inspection of the forward avionics compartment door.
 (2) Make sure that there are no signs of corrosion, cracks or damage.
 5. Close-up________
 Subtask 05-28-10-410-050
 A. Close Access 
R R  (1) Close the forward avionics compartment door 811, (Ref. TASK 52-41-00-410-002).
 (2) Remove the access platform(s).

 TASK 05-28-10-200-002

R  Zonal Inspection of Forward Avionics Compartment Door
 1. Reason for the Job__________________
 Refer to the MPD TASK: ZL-811-02
 2. Job Set-up Information______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific  access platform 1.80 m (5 ft. 11 in.)
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R R  52-41-00-010-002 52-41-00-410-002 05-28-10-991-001  Open the Avionics Compartment Doors for Access Close the Avionics Compartment Doors after AccessFig. 601
 3. Job Set-up__________
 Subtask 05-28-10-010-051
 A. Get Access
 (1) Put an access platform in position at the zone 811. 
R R  (2) Open the forward avionics compartment door 811, (Ref. TASK 52-41-00-010-002). (Ref. Fig. 601/TASK 05-28-10-991-001)
 (3) Remove the door panel and the insulation blanket.

 4. Procedure
_________

 Subtask 05-28-10-210-051
 A. Inspection 
R R  (1) Do a general visual inspection of the forward avionics compartment door.
 (2) Make sure that there are no signs of corrosion, cracks or damage.
 5. Close-up________
 Subtask 05-28-10-410-051
 A. Close Access 
R  (1) Install the door panel and the insulation blanket. 
R R  (2) Close the forward avionics compartment door 811, (Ref. TASK 52-41-00-410-002).
 (3) Remove the access platform(s).

 TASK 05-28-10-200-003

R Zonal Inspection of Lateral Avionics Compartment Doors
 1.
 Reason for the Job

__________________
 Refer to the MPD TASK: ZL-812-01

 2.
 Job Set-up Information

______________________
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 時間限制/維護檢查 3(89)