NOTE : Wait for a minimum of 3 minutes after the SCU power-on, then continue
____ with the procedure.
2. On the SCU 11MH, MODE SELECT area:
-push and hold the menbrane switch for 5 seconds.
3. On the SCU 11MH, on the key pad:
-
push four times the '9'
membrane switch.
-
push ENTER the membrane switch.
4. On the SCU 11MH, on the key pad:
-push the up or down arrow membrane switch to move the
-
the AUTO MODE selection page comes into view.
On the SCU 11MH, on the monitor:
-
the MAINTENANCE MODE page comes intoview.
On the SCU 11MH, on the monitor:
-
the MAINTENANCE MODE selection page comes into view.
On the SCU 11MH, on the monitor:
R 1EFF : 106-149, 211-299, 1 23-36-00Page 305 1 1 May 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
cursor to the item
CONFIGURATION,
-push the ENTER membrane switch.
5. On the SCU 11MH, on the key pad:
-
push the up or down arrow membrane switch to move the cursor to the item PSCU CONFIG,
-
push the ENTER membrane switch.
6. On the SCU 11MH, on the key pad: NOTE : If the VTR1/BCS1 YES
____ message comes into view, go to the next step.
-
push the up or down arrow membrane switch to move the cursor to NO,
-
push the SEL membrane switch,
-
push the up or down arrow membrane switch to move the cursor to the VTR1/BCS1.
7. On the SCU 11MH, on the key pad:
-push the SEL membrane switch.
8. On the SCU 11MH, on the key pad: NOTE : If the VTR2/BCS2 YES
____ message comes into view, go to the next step.
-
the CONFIGURATION selection page comes into view.
On the SCU 11MH, on the monitor:
-
the PSCU CONFIG selection page comes into view with the following message VTR1/BCS1 YES or VTR1/BCS1 NO.
On the SCU 11MH, on the monitor:
-
the cursor move to NO,
-NO replaces by YES.
On the SCU 11MH, on the monitor:
-the PSCU CONFIG selection page comes into view with the following message VTR2/BCS2 Yes or VTR2/BCS2 NO.
On the SCU 11MH, on the monitor:
R 1EFF : 106-149, 211-299, 1 23-36-00Page 306 1 1 May 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
-
push the up or down arrow membrane switch to move the cursor to NO,
-
push the SEL membrane switch,
-
push the up or down arrow membrane switch to move the cursor to the VTR2/BCS2.
9. On the SCU 11MH, on the key pad:
-push the SEL membrane switch.
10. On the SCU 11MH, on the key pad: NOTE : If the VTR3/BCS3 NO
____ message comes into view, go to the next step.
-
push the up or down arrow membrane switch to move the cursor to YES,
-
push the SEL membrane switch.
-
push the up or down arrow membrane switch to move the cursor to the VTR3/BCS3.
11. On the SCU 11MH, on the key pad:
-push the SEL membrane switch.
12. On the SCU 11MH, on the key pad: NOTE : If the VTR4/BCS4 NO
____ message comes into view, go to the next step.
-the cursor move to NO,
-NO replaces by YES.
On the SCU 11MH, on the monitor:
-
the PSCU CONFIG selection page comes into view with the following message VTR3/BCS3 NO or VTR3/BCS3 YES.
On the SCU 11MH, on the monitor:
-
the cursor move to YES,
-YES replaces by NO.
On the SCU 11MH, on the monitor:
-the PSCU CONFIG selection page comes into view with the following message VTR4/BCS4 NO or VTR4/BCS4 YES.
On the SCU 11MH, on the monitor:
R 1EFF : 106-149, 211-299, 1 23-36-00Page 307 1 1 May 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
-
push the up or down arrow membrane switch to move the cursor to YES,
-
push the SEL membrane switch,
-
push the up or down arrow membrane switch to move the cursor to the VTR4/BCS4.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM Communications 通訊2(49)
