4. Procedure
_________
**ON A/C 001-049, 051-099, 101-105, 201-299,
(Ref. Fig. 401/TASK 23-73-47-991-001)
**ON A/C 106-149,
(Ref. Fig. 401A/TASK 23-73-47-991-001-D)
**ON A/C 151-199,
(Ref. Fig. 401B/TASK 23-73-47-991-001-A)
**ON A/C 301-399,
(Ref. Fig. 401C/TASK 23-73-47-991-001-C) R **ON A/C 401-499,
R (Ref. Fig. 401D/TASK 23-73-47-991-001-E) **ON A/C 001-049, 051-099, 101-105, 151-199, 201-299,
Subtask 23-73-47-420-050
A. Installation of the DEU-B.
(1)
Clean the component interface and/or the adjacent area.
(2)
Do an inspection of the component interface and/or the adjacent area.
(3)
Remove the blanking caps from the electrical connectors (2), (3) and (4).
(4)
Make sure that the electrical connectors are clean and in the correct condition.
1EFF : ALL 1 23-73-47Page 420 1 1 Aug 01/05 1 1 1CES 1
(5)
Carefully install the Decoder/Encoder Unit (DEU) B (1) into the mounting tray (6). Make sure that the (DEU) B (1) is correctly aligned to prevent damage to the electrical connector (4).
(6)
Connect the electrical connectors (2 and 3) to the (DEU) B (1) and safety with the locking springs (7).
R **ON A/C 106-149, 301-399, 401-499,
Subtask 23-73-47-420-050-A
A. Installation of the Decoder/Encoder Unit (DEU) B
(1)
Clean the component interface and/or the adjacent area.
(2)
Do an inspection of the component interface and/or the adjacent area.
(3)
Put the DEU B (6) in the correct position.
(4)
Tighten the nylatches (5).
(5)
Remove the blanking caps from the electrical connectors.
(6)
Make sure that the electrical connectors are clean and in the correct condition.
(7)
Connect the electrical connectors (2) to the DEU B (6).
(8)
Safety the electrical connectors (2). CAUTION : MAKE SURE THAT THE SPRING LATCHES CORRECTLY HOLD THE
_______ CONNECTOR IN THE FULLY ENGAGED POSITION. THE SPRING LATCHES PREVENT UNWANTED MOVEMENT OF THE CONNECTOR, AND THUS THE RISK OF ARCING, WHICH CAN CAUSE DAMAGE TO THE UNIT.
(a) Safety the electrical connectors (2) with the spring latches (1).
(9) Make sure that the coding switches are in the positions recorded during the removal procedure.
(10) Install the connection/termination box (4) and tighten the nylatches (3).
R 1EFF : ALL 1 23-73-47Page 421 1 1 Aug 01/05 1 1 1CES 1 **ON A/C ALL
Subtask 23-73-47-865-052
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 153RH, 162RH, 193RH
R **ON A/C 106-149, 401-499,
Subtask 23-73-47-865-056
C. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 32MG, 45MG, 39MG, 34MG, 35MG, 33MG, 1MP, 1MA.
**ON A/C 301-399,
Subtask 23-73-47-865-056-A
C. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 194RH, 32MG, 45MG, 39MG, 34MG, 35MG, 33MG, 1MP, 1MA.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM Communications 通訊4(148)
