R **ON A/C 106-149, 301-399, 401-499,
49VU COM DIR ESS/1 150RH G01
49VU COM/CIDS/FWD ATTND PNL/ESS 171RH H01
**ON A/C 301-399,
49VU COM DIR ESS/2 157RH G02
R 1EFF : 106-149, 301-399, 401-499, 1 23-73-12Page 402 1 1 Config-2 Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
R **ON A/C 106-149, 401-499,
121VU COM NAV/CIDS/DIR NORM/2 156RH M06 121VU COM/FAP1/NORM 170RH Q14
**ON A/C 301-399,
121VU COM NAV/CIDS/DIR NORM/2 156RH M07 121VU COM NAV/CIDS/DIR NORM/1 151RH M06 121VU COM NAV/CIDS/FWD ATTND/PNL 170RH Q14
R **ON A/C 106-149, 301-399, 401-499,
122VU AIR COND/CIDS/SDF/DIR NORM/2 14WH T18 122VU AIR COND/CIDS/SDF/DIR NORM/1 17WH T17
4. Procedure
_________
(Ref. Fig. 401/TASK 23-73-12-991-008)
Subtask 23-73-12-020-058
A. Removal of the FAP
(1)
Release the quick-release fastener (1) and open the cover (2).
(2)
Remove the CAM - Cabin Assignment Module (115RH) (Ref. TASK 23-73-19-000-002)
(3)
Remove the OBRM - On Board Replaceable Module (116RH) (Ref. TASK 23-73-21-000-001)
(4)
Disconnect the electrical connectors (3).
(5)
Remove the screws (4) and the washers (5) and carefully remove the FAP (6) from the holder (7).
(6)
Put blanking caps on the disconnected electrical connectors.
R 1EFF : 106-149, 301-399, 401-499, 1 23-73-12Page 403 1 1 Config-2 Aug 01/05 1 1 1CES 1
Flight Attendant Panel 120RH
Figure 401/TASK 23-73-12-991-008
R 1EFF : 106-149, 301-399, 401-499, 1 23-73-12Page 404 1 1 Config-2 Aug 01/05 1 1 1CES 1 TASK 23-73-12-400-007
Installation of the Flight Attendant Panel (FAP) 120RH
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
23-73-00-740-010 Interface and Power-Up Test of the Cabin
Intercommunication Data System (CIDS) via the CFDS 23-73-00-869-001 OBRM - Download Procedure 23-73-19-400-002 Installation of the Cabin Assignment Module (115RH) 23-73-21-400-001 Installation of the On Board Replaceable Module
(OBRM) 116RH 24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power 23-73-12-991-008 Fig. 401
3. Job Set-up
__________
Subtask 23-73-12-861-064
A. Aircraft Maintenance Configuration
(1) Make sure that the aircraft electrical circuits are energized (Ref. TASK 24-41-00-861-002).
R 1EFF : 106-149, 301-399, 401-499, 1 23-73-12Page 405 1 1 Config-2 Aug 01/05 1 1 1CES 1
Subtask 23-73-12-865-071
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU AIR COND/CIDS/SDF/DIR2 ESS 18WH C06 49VU AIR COND/CIDS/SDF/DIR1 ESS 15WH C05
R **ON A/C 106-149, 401-499,
49VU COM/CIDS/DIR ESS/2 157RH G02
R **ON A/C 106-149, 301-399, 401-499,
49VU COM DIR ESS/1 49VU COM/CIDS/FWD ATTND PNL/ESS 150RH 171RH G01H01
**ON A/C 301-399,
49VU COM DIR ESS/2 157RH G02
R **ON A/C 106-149, 401-499,
121VU COM NAV/CIDS/DIR NORM/2 121VU COM/FAP1/NORM 156RH 170RH M06Q14
**ON A/C 301-399,
121VU COM NAV/CIDS/DIR NORM/2 121VU COM NAV/CIDS/DIR NORM/1 121VU COM NAV/CIDS/FWD ATTND/PNL 156RH 151RH 170RH M07M06Q14
R **ON A/C 106-149, 301-399, 401-499,
122VU AIR COND/CIDS/SDF/DIR NORM/2 122VU AIR COND/CIDS/SDF/DIR NORM/1 14WH 17WH T18T17
R 1EFF : 106-149, 301-399, 401-499, 1 23-73-12Page 406
1 1 Config-2 Aug 01/05 1 1 1CES 1
4. Procedure
_________
(Ref. Fig. 401/TASK 23-73-12-991-008) Subtask 23-73-12-420-057
A. Installation of the FAP
(1)
Clean the component interface and/or the adjacent area.
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊 AMM Communications 通訊4(98)
