Subtask 26-23-41-020-056
A. Removal of the Cartridges
(1)
Disconnect the electrical connector (15) from the cartridge (14).
(a)
Put a blanking cap on the electrical connector (15).
(b)
Install the SHUNT PLUG - FIRE EXTINGUISHER CARTRIDGE, HTL (10-101950-81) on the cartridge (14).
(2)
Disconnect the electrical connector (8) from the cartridge (7).
(a)
Put a blanking cap on the electrical connector (8).
(b)
Install the SHUNT PLUG - FIRE EXTINGUISHER CARTRIDGE, HTL (10-101950-81) on the cartridge (7).
(3)
Remove and discard the lockwire from the cartridge (14).
(4)
Remove the cartridge (14).
(5)
Remove and discard the O-ring (30).
(6)
Remove the bonding strip (13) from the cartridge (14).
(a) Put a blanking plug on the discharge head (12).
(7)
Remove and discard the lockwire from the cartridge (7).
(8)
Remove the cartridge (7).
(9)
Remove and discard the O-ring (30).
(10) Remove the bonding strip (6) from the cartridge (7).
(a) Put a blanking plug on the discharge head (5).
R 1EFF : 004-049, 051-099, 101-149, 151-199, 1 26-23-41Page 408 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1 **ON A/C 301-399,
Subtask 26-23-41-020-056-A
A. Removal of the Cartridges
(1) Disconnect the electrical connector (15) from the cartridge (14).
(a) Put a blanking cap on the electrical connector (15).
R (b) Install the PROTECTIVE CAP - FIRE EXTINGUISHER CARTRIDGE (861823) on the cartridge (14).
(2) Disconnect the electrical connector (8) from the cartridge (7).
(a) Put a blanking cap on the electrical connector (8).
R (b) Install the PROTECTIVE CAP - FIRE EXTINGUISHER CARTRIDGE (861823) on the cartridge (7).
(3)
Remove and discard the lockwire from the cartridge (14).
(4)
Remove the cartridge (14).
(5)
Remove the bonding strip (13) from the cartridge (14).
(6)
Remove and discard the O-ring (30).
(a) Put a blanking plug on the discharge head (12).
(7)
Remove and discard the lockwire from the cartridge (7).
(8)
Remove the cartridge (7).
(9)
Remove the bonding strip (6) from the cartridge (7).
(10) Remove and discard the O-ring (30).
(a) Put a blanking plug on the discharge head (5).
R **ON A/C 004-049, 051-099, 101-149, 151-199, 201-299, 301-399, 401-499,
TASK 26-23-41-400-005 Installation of the Cartridge of the Cargo Fire-Extinguisher Bottle WARNING : THE CARTRIDGE IS AN EXPLOSIVE DEVICE. TO PREVENT EXPLOSION OF THE
_______
CARTRIDGE (NOT FIRED) AND INJURY TO PERSONNEL:
-INSTALL THE APPLICABLE PROTECTIVE DEVICE (CAP OR PLUG).
THIS WILL PROTECT THE ELECTRICAL CONNECTOR OF THE CARTRIDGE.
DO NOT USE A FOIL SHUNT.
WARNING : DO NOT REMOVE/INSTALL THE DISCHARGE HEAD WITH THE CARTRIDGE
_______
INSTALLED.
WARNING : MAKE SURE THAT THE MAXIMUM PERMITTED LIFE (MPL) OF THE CARTRIDGE IS
_______
LONGER THAN THE TIME TO THE NEXT SCHEDULED INSPECTION.
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 1.9 m (6 ft. 3 in.)
No specific Torque Wrench : range 36.00 to 220.00 lbf.in
(0.40 to 2.60 m.daN)
10-101950-81 2 SHUNT PLUG - FIRE EXTINGUISHER CARTRIDGE, HTL
861823 2 PROTECTIVE CAP - FIRE EXTINGUISHER CARTRIDGE
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
No specific corrosion-resistant steel lockwire dia. 0.8 mm
(0.030 in)
R 1EFF : 004-049, 051-099, 101-149, 151-199, 1 26-23-41Page 410 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1
C. Expendable Parts
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FIRE PROTECTION 防火2(102)
