C. Get Access
(1)
FOR 6WE1, 8WE1
-Open the access doors 415BR, 415BL.
(2)
FOR 6WE2, 8WE2
-Open the access doors 425BR, 425BL.
4. Procedure
_________
(Ref. Fig. 401/TASK 26-21-41-991-001)
**ON A/C 001-049, 101-105, 201-210,
(Ref. Fig. 402/TASK 26-21-41-991-002) R **ON A/C 051-099, 106-149, 151-199, 211-299, 301-399, 401-499,
(Ref. Fig. 402A/TASK 26-21-41-991-002-A)
**ON A/C ALL
Subtask 26-21-41-020-058
A. Disconnect the Electrical Connector
(1)
Disconnect the electrical connector (1) from the pressure switch (13).
(2)
Disconnect the electrical connector (8) from the cartridge (9).
(3)
Put blanking caps on the disconnected electrical connectors.
Engine Fire-Extinguisher Bottle - Location
Figure 401/TASK 26-21-41-991-001
1EFF : ALL 1 26-21-41 Page 405
1 1 Feb 01/98
1 1
1CES 1
Engine Fire-Extinguisher Bottle
Figure 402/TASK 26-21-41-991-002
R 1EFF : 001-049, 101-105, 201-210, 1 26-21-41Page 406 1 1 May 01/05 1 1 1CES 1
Engine Fire-Extinguisher Bottle Figure 402A/TASK 26-21-41-991-002-A
R 1EFF : 051-099, 106-149, 151-199, 211-299, 1 26-21-41Page 407 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1
R **ON A/C 001-049, 101-105, 201-210,
Subtask 26-21-41-481-050
B. Install the Safety Tool WARNING : THE CARTRIDGE IS AN EXPLOSIVE DEVICE. TO PREVENT EXPLOSION OF
_______ THE CARTRIDGE (NOT FIRED) AND INJURY TO PERSONNEL: -INSTALL THE APPLICABLE PROTECTIVE DEVICE (CAP OR PLUG). THIS WILL PROTECT THE ELECTRICAL CONNECTOR OF THE CARTRIDGE. DO NOT USE A FOIL SHUNT.
(1) Put a SHUNT PLUG - FIRE EXTINGUISHER CARTRIDGE (263193) on the cartridge (9).
Subtask 26-21-41-020-051
C. Removal of the Fire Extinguisher Bottle
(1)
Loosen the nut (6).
(2)
Remove the screws (2) and the washers (3).
(3)
Turn the line (4) to the left.
(4)
Turn the bottle (12) and remove the nut (15), the screw (18), the washer (17) and the bonding lead (16) from the discharge head (10).
(5)
Remove the bottle (12): WARNING : BE VERY CAREFUL WHEN YOU MOVE A FILLED FIRE EXTINGUISHER
_______ BOTTLE. A HEAVY SHOCK COULD CAUSE PERCUSSION.
(a) Remove the bottle (12) and put it on an applicable support.
(6) Put blanking plugs on the disconnected line ends.
R 1EFF : 001-049, 101-105, 201-210, 1 26-21-41Page 408 1 1 May 01/05 1 1 1CES 1R **ON A/C 051-099, 106-149, 151-199, 211-299, 301-399, 401-499,
Subtask 26-21-41-481-050-A
B. Install the Safety Tool WARNING : THE CARTRIDGE IS AN EXPLOSIVE DEVICE. TO PREVENT EXPLOSION OF
_______ THE CARTRIDGE (NOT FIRED) AND INJURY TO PERSONNEL: -INSTALL THE APPLICABLE PROTECTIVE DEVICE (CAP OR PLUG). THIS WILL PROTECT THE ELECTRICAL CONNECTOR OF THE CARTRIDGE. DO NOT USE A FOIL SHUNT.
(1) Put a PROTECTIVE CAP - FIRE EXTINGUISHER CARTRIDGE (861823) on the cartridge (9).
Subtask 26-21-41-020-051-A
C. Removal of the Fire-Extinguisher Bottle
(1)
Loosen the nut (6).
(2)
Remove the screws (2) and the washers (3).
(3)
Turn the line (4) to the left.
(4)
Turn the bottle (12) and remove the nut (15), the washer (16) and the bonding lead (14) from the screw (17).
(5)
Remove the bottle (12): WARNING : BE VERY CAREFUL WHEN YOU MOVE A FILLED FIRE EXTINGUISHER
_______ BOTTLE. A HEAVY SHOCK COULD CAUSE PERCUSSION.
(a) Remove the bottle (12) and put it on an applicable support.
(6) Put blanking plugs on the disconnected line ends.
R 1EFF : 051-099, 106-149, 151-199, 211-299, 1 26-21-41Page 409 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1 **ON A/C ALL
TASK 26-21-41-400-001 Installation of the Engine Fire-Extinguisher Bottle (6WE1,8WE1,6WE2,8WE2) WARNING : THE ACCIDENTAL FIRING OF THE EXTINGUISHER BOTTLE CAN CAUSE SERIOUS
_______
INJURY TO PERSONS WHO WORK OR ARE IN THE CLOSE PROXIMITY.
WARNING : IF YOU REMOVE THE FIRE EXTINGUISHER BOTTLES IN A CLOSED HANGAR, MAKE
_______
SURE THAT THERE IS A FLOW OF NEW AIR IN THE HANGAR.
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FIRE PROTECTION 防火2(30)
