R **ON A/C 001-049, 101-149, 151-199, 211-299, 301-399, 401-499,
 (Ref. Fig. 401/TASK 26-22-42-991-001)
 **ON A/C 051-099, 201-210,
 (Ref. Fig. 401A/TASK 26-22-42-991-001-A)
 **ON A/C ALL
 WARNING : MAKE SURE THAT THE MAXIMUM PERMITTED LIFE (MPL) OF THE CARTRIDGE
_______ IS LONGER THAN THE TIME TO THE NEXT SCHEDULED INSPECTION.
R **ON A/C 001-049, 101-149, 151-199, 211-299, 301-399, 401-499,
 Subtask 26-22-42-210-051
 A. Preparation for Installation
 WARNING : THE CARTRIDGE IS AN EXPLOSIVE DEVICE. TO PREVENT EXPLOSION OF
_______ THE CARTRIDGE (NOT FIRED) AND INJURY TO PERSONNEL: -INSTALL THE APPLICABLE PROTECTIVE DEVICE (CAP OR PLUG). THIS WILL PROTECT THE ELECTRICAL CONNECTOR OF THE CARTRIDGE. DO NOT USE A FOIL SHUNT.

 (1)
 Make sure that the SHUNT PLUG - FIRE EXTINGUISHER CARTRIDGE (2-100831-1) is installed on the cartridge (2).

 (2)
 Clean the component interface and/or the adjacent area.

 (3) Do an inspection of the component interface and/or the adjacent area. Subtask 26-22-42-420-050
 B. Installation of the Fire-Extinguisher Bottle Cartridge (12WF) WARNING : DO NOT INSTALL THE CARTRIDGE ON THE DISCHARGE HEAD IF THE HEAD
_______
 IS NOT INSTALLED ON THE FIRE EXTINGUISHER BOTTLE.

 (1)
 Install the new 0-ring (7) on the cartridge (2).

 (2)
 Install the bonding lug (3) and the cartridge (2).

 (3)
 TORQUE the cartridge (2) to between 1.05 and 1.15 m.daN (92.92 and

 101.76 lbf.in).

 (4)
 Safety the cartridge (2) with corrosion-resistant steel lockwire 0.8 mm (0.032 in.) dia.

 (5)
 Install the washer (4), the bonding strap (5) and the nut (6) on the bonding lug (3) (Ref. TASK 20-28-00-912-004).

 (6)
 Remove the SHUNT PLUG - FIRE EXTINGUISHER CARTRIDGE (2-100831-1) from the cartridge (2).

 (7)
 Remove the blanking caps from the electrical connectors.

 (8)
 Make sure that the electrical connectors are clean and in the correct condition.

 (9)
 Connect the electrical connector (1) to the cartridge (2).

 (10) Safety the electrical connector (1) with corrosion-resistant steel lockwire 0.6 mm (0.024 in.) dia.
R 1EFF : 001-049, 101-149, 151-199, 211-299, 1 26-22-42Page 410 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1

R **ON A/C 051-099, 201-210,

 Subtask 26-22-42-210-051-A
 A. Preparation for Installation WARNING : THE CARTRIDGE IS AN EXPLOSIVE DEVICE. TO PREVENT EXPLOSION OF
_______ THE CARTRIDGE (NOT FIRED) AND INJURY TO PERSONNEL: -INSTALL THE APPLICABLE PROTECTIVE DEVICE (CAP OR PLUG). THIS WILL PROTECT THE ELECTRICAL CONNECTOR OF THE CARTRIDGE. DO NOT USE A FOIL SHUNT.
 (1)
 Make sure that the SHUNT DEVICE - FIRE EXTINGUISHER CARTRIDGE (324301) is installed on the cartridge (2).

 (2)
 Clean the component interface and/or the adjacent area.

 (3) Do an inspection of the component interface and/or the adjacent area. Subtask 26-22-42-420-050-A
 B. Installation of the Fire-Extinguisher Bottle Cartridge (12WF)
 (1)
 Install the bonding lug (3) and the cartridge (2).

 (2)
 TORQUE the cartridge (2) to between 0.92 and 1.15 m.daN (81.41 and

 101.76 lbf.in).

 (3)
 Safety the cartridge (2) with corrosion-resistant steel lockwire 0.8 mm (0.032 in.) dia.

 (4)
 Install the washer (4), the bonding strap (5) and the nut (6) on the bonding lug (3) (Ref. TASK 20-28-00-912-004).

 (5)
 Remove the SHUNT DEVICE - FIRE EXTINGUISHER CARTRIDGE (324301) from the cartridge (2).

 (6)
 Remove the blanking caps from the electrical connectors.

 (7)
 Make sure that the electrical connectors are clean and in the correct condition.

 (8)
 Connect the electrical connector (1) to the cartridge (2).

 (9)
 Safety the electrical connector (1) with corrosion-resistant steel lockwire 0.6 mm (0.024 in.) dia.

R 1EFF : 051-099, 201-210, 1 26-22-42Page 411 1 1 May 01/05 1 1 1CES 1 **ON A/C ALL

 Subtask 26-22-42-865-053
 C. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 1KD, 2KD, 1WG, 2WG, 1WF, 2WF, 3WF, 4WF
 Subtask 26-22-42-710-051
 D. Do the operational test of the APU Fire-Extinguishing Loop/Squib
 (Ref. TASK 26-22-00-710-001).

 5. Close-up
________ Subtask 26-22-42-410-053
 A. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FIRE PROTECTION 防火2(86)