(4) Install the applicable wing trailing-edge access panels.
 **ON A/C 301-399,

 Subtask 28-11-00-410-060-A
 A. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Install the applicable fuel tank access panels (Ref. TASK 57-27-11-400-001) (Ref. TASK 57-27-11-400-002).

 (3)
 Install the applicable wing leading-edge access panels.

 (4) Install the applicable wing trailing-edge access panels.
 **ON A/C ALL

 Subtask 28-11-00-865-080
 B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 1QA, 2QA, 7QA, 8QA, 11QA, 12QA, 29QA, 30QA, 1QL, 2QL.
 1EFF : ALL 1 28-11-00Page 544 1 1 Aug 01/05 1 1 1CES 1 Subtask 28-11-00-860-064

 C. Aircraft Configuration
 (1)
 Refuel, defuel or transfer fuel as necessary (Ref. TASK 12-11-28-650-003), (Ref. TASK 28-25-00-650-001) or (Ref. TASK 28-25-00-869-001).

 (2)
 Retract the spoilers (Ref. TASK 27-60-00-866-002).

 (3)
 On the spoiler servo-control, make sure that the pointer on the hex. head is opposite the letter 'O' on the housing.

 (4) Fully retract the flaps (Ref. TASK 27-50-00-866-009). Subtask 28-11-00-942-074
 D. Removal of Equipment
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Remove the safety barriers.

 (3)
 Remove the warning notice(s).

 (4)
 Remove the access platform(s).

 (5)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 1EFF : ALL 1 28-11-00Page 545 1 1 May 01/04R 1 1 1CES 1

 TASK 28-11-00-790-006
 Leak Test of the Wing Tanks and Vent Surge Tank (without Fuel) by the Vacuum and Dye Procedure
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
 START A TASK ON OR NEAR:

 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
 GEAR.

 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific blanking cap
 No specific circuit breaker(s) safety clip(s)
 No specific manometer
 No specific manometer negative press range of 2.00 to 4.00 p.s.i.

 (0.138 to 0.276 bar) No specific plastic bag No specific putty No specific safety barriers No specific soft brush No specific syringe No specific vacuum equipment No specific vacuum equipment capable of a negative pressure to
 4.00 p.s.i. (0.276 bar)
 No specific warning notice
 No specific access platform 2.9 m (9 ft. 6 in.)
 No specific access platform 3.5 m (11 ft. 6 in.)
 No specific adjustable access platform 4.0 m (13 ft. 1 in.)

R No specific Torque Wrench : range 5.00 to 35.00 lbf.in
R (0.05 to 0.40 m.daN)

 1EFF : ALL 1 28-11-00Page 546 1 1 May 01/05 1 1 1CES 1

 -------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific Torque Wrench : range 36.00 to 220.00 lbf.in
 (0.40 to 2.60 m.daN) 98D57204000000 1 DUMMY DOOR-NACA VENT
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 05-045
 Material No. 05-045A
 Material No. 05-046B

 Material No. 11-004
Material No. 19-003

FLUORESCENT DYE PIGMENT :INTENSE GREEN DYE
 (Ref. 20-31-00)

 FLUORESCENT DYE PIGMENT :BLUISH WHITE DYE
 (Ref. 20-31-00)

 YELLOW DYE (Ref. 20-31-00)
USA MIL-T-81533
 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
 (Ref. 20-31-00)
USA AMS 3819
 LINT-FREE COTTON CLOTH (Ref. 20-31-00)

 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊 AMM FUEL 燃油1(117)