15. R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
5. Close-up
________
Subtask 28-12-41-410-055
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Install the applicable access panels (Ref. TASK 57-27-11-400-002):
-
FOR 102QM
install 540JB, 540KB
-
FOR 103QM
install 640JB, 640KB.
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 28-12-41Page 418 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1 Subtask 28-12-41-650-051
B. Fuel Configuration
(1) Refuel, defuel or transfer fuel as necessary (Ref. TASK 12-11-28-650-003), (Ref. TASK 28-25-00-650-001) and (Ref. TASK 28-25-00-869-001).
Subtask 28-12-41-942-054
C. Removal of Equipment
(1)
Remove the safety barriers.
(2)
Remove the warning notice(s).
(3)
Remove the access platform(s).
(4)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 28-12-41Page 419 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1R **ON A/C ALL
TASK 28-12-41-000-003
Removal of the Overpressure Protector 96QM
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
GEAR.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific safety barriers
No specific access platform 2.5 m (8 ft. 2 in.)
No specific access platform 2 m (6 ft. 7 in.)
98D57004014000 1 HOOK-COVER (RIB2-SURGE DOORS)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
28-10-00-910-001 Safety Procedures When You Do Work in a Fuel Tank 28-10-00-910-002 Access to the Fuel Tanks and the Work Areas 28-25-00-650-001 Pressure Defuel 28-25-00-650-003 To Drain Remaining Fuel from the Wing Tanks and the
Center Tank 32-12-00-010-001 Open the Main Gear Doors for Access 57-17-11-000-001 Removal of the Covers 147AZ (148AZ) 57-27-11-000-001 Removal of the Access Panel (540AB, 540BB, 540CB,
540DB, 540EB, 540FB, 540GB, 640AB, 640BB, 640CB, 640DB, 640EB, 640FB, 640GB)
1EFF : ALL 1 28-12-41Page 420 1 1 May 01/04 1 1 1CES 1 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
28-12-41-991-005 Fig. 403
3. Job Set-up
__________
(Ref. Fig. 403/TASK 28-12-41-991-005)
Subtask 28-12-41-941-055
A. Safety Precautions WARNING : OBEY THE SAFETY PROCEDURES WHEN YOU DO WORK IN A FUEL TANK.
_______
(1) You must obey the fuel safety procedures (Ref. TASK 28-10-00-910-001) when you do work in a fuel tank.
(2) Put the safety barriers in position.
Subtask 28-12-41-860-053
B. Aircraft Maintenance Configuration
(1)
Defuel the applicable fuel tanks (Ref. TASK 28-25-00-650-001).
(2)
Drain the remaining fuel from the applicable fuel tanks (Ref. TASK 28-25-00-650-003).
Subtask 28-12-41-010-056
C. Get Access WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE LANDING GEAR DOORS ARE
_______
CLEAR.
R (1) Open the LH MLG door (Ref. TASK 32-12-00-010-001).
R (2) Make sure that the GROUND LOCK SLEEVE (460005835) is installed on the R LH MLG door actuator.
(3)
Put the access platform in position below zone 147.
(4)
Put the access platform in position below the zone 540.
1EFF : ALL 1 28-12-41Page 421 1 1 Nov 01/00 1 1 1CES 1
R Overpressure Protector - Center Tank Figure 403/TASK 28-12-41-991-005
1EFF : 1 1 1CES ALL 1 111 28-12-41 Page 422 Nov 01/00
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUEL 燃油2
