(1) Remove the transport pin (1) from the cadensicon (2). Subtask 28-42-16-420-054
C. Installation of the Cadensicon 20QT
(Ref. Fig. 403/TASK 28-42-16-991-002)
(1)
Install the cadensicon (1) on the support bracket (3) with the bolts (2).
(2)
Apply a layer of SEALANTS (Material No. 09-007) to the two ends of the bolts (2).
CAUTION : REFER TO THE MATCH MARKS MADE DURING THE REMOVAL WHEN YOU
_______ CONNECT THE ELECTRICAL WIRES. INCORRECT CONNECTION OF THE WIRES WILL CAUSE DAMAGE TO EQUIPMENT.
(3) Remove the blanking caps and connect the electrical connectors (4) to the cadensicon (1).
Subtask 28-42-16-410-051
D. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Install the applicable center-tank access panel 147AZ (148AZ) (Ref. TASK 57-17-11-400-001).
(3)
Remove the access platform(s).
(4) Close the applicable MLG door (Ref. TASK 32-12-00-410-001). Subtask 28-42-16-650-055
E. Fuel Configuration
(1) Refuel, defuel or transfer fuel as necessary (Ref. TASK 12-11-28-650-003), (Ref. TASK 28-25-00-650-001) or (Ref. TASK 28-25-00-869-001).
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 28-42-16Page 422 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1 Subtask 28-42-16-865-055
F. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 1QT, 2QT, 8QT, 1QU, 2QU.
Subtask 28-42-16-740-051
G. Test
(1) Do a STATUS REPORT (BITE) test on the Fuel Quantity Indicating System (Ref. TASK 28-42-00-740-001).
5. Close-up
________ Subtask 28-42-16-942-051
A. Removal of Equipment
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Remove the safety barriers.
(3)
Remove the warning notice(s).
(4)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 28-42-16Page 423 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1
PRESELECTOR - FUEL QUANTITY (5QT) - REMOVAL/INSTALLATION
________________________________________________________ TASK 28-42-21-000-001 Removal of the Fuel Quantity Preselector 5QT WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE. WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking caps No specific circuit breaker(s) safety clip(s) No specific safety barriers
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
28-42-21-991-001-A Fig. 401
1EFF : ALL 1 28-42-21Page 401 1 1 May 01/04R 1 1 1CES 1
3. Job Set-up
__________
(Ref. Fig. 401/TASK 28-42-21-991-001-A)
Subtask 28-42-21-941-052
A. Safety Precautions R
R (1) Put the safety barriers in position. Subtask 28-42-21-865-050
B. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU FUEL/FQI/CHAN/1 1QT A13 121VU FUEL/FQI/CHANNEL/1 AND 2 8QT L26 121VU FUEL/FQI/CHAN/2 2QT M27
Subtask 28-42-21-010-050
C. Get Access
(1) Open the access panel 192MB. NOTE : Do not keep the door open longer than necessary because the
____
battery can discharge.
4. Procedure
_________
(Ref. Fig. 401/TASK 28-42-21-991-001-A)
Subtask 28-42-21-020-053
A. Removal of the Fuel Quantity Preselector 5QT
(1)
Release the quick-release fasteners (3). CAUTION : DO NOT PULL THE PRESELECTOR TOO FAR AND DO NOT LET IT HANG
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊 AMM FUEL 燃油5(77)
