R 1EFF : 106-149, 155-199, 208-299, 301-399, 1 31-32-00Page B32 1401-499, 1Aug 01/05 1 1 1CES 1 * Parameters from MCDU 3 (labels 303, 270)(If installed): As the MCDU 3 is supplied on the ground only, these parameters are permanently acquired on the ground (under NULL or DC2).
-Criteria of monitoring
*
For the FAC 1, FDIU, DMC 1, AMU, CIDS 1, monitoring consists in checking labels only when they are used.
*
For the MCDU PRINTER, CLOCK and CFDIU, monitoring is of the permanent type.
*
For the FWCs, monitoring is described below.
(b) Description of faults
-Monitoring of the FAC 1 (external fault)
The FAC 1 provides the following parameters: Flight Number : labels 233, 234, 235, 236 City Pair : labels 040, 041, 042.
In the event of incorrect reception of at least one of these labels (label absent, confirmation over 3 cycles), the CFDIU memorizes:
"NO FAC 1 DATA"
-Monitoring of the FDIU (external fault)
The FDIU provides the following parameter:
A/C Identification : labels 301, 302, 303, 304.
In the event of incorrect reception of at least one of these
labels (label absent, confirmation over 3 cycles), the CFDIU
memorizes:
"NO FDIU DATA"
-
Monitoring of the FWC 1 and 2 (external faults)
Monitoring described below.
-
Monitoring of the DMC 1 (external fault)
The DMC 1 provides the following parameters:
Engine serial number : labels 46, 47
A/C configuration : label 305.
In the event of incorrect reception of label 305, (label
absent,
confirmation over 3 cycles), the CFDIU memorizes:
"NO DMC 1 DATA"
-Monitoring of the AMU (external fault)
The AMU provides the following parameter:
A/C configuration : label 350.
In the event of incorrect reception (label absent or SSM at FW
confirmation over 3 cycles) of this label, the CFDIU memorizes:
"NO AMU DATA"
-Monitoring of the CIDS 1 (external fault)
The CIDS 1 provides the following parameter:
A/C confirmation : label 146.
R 1EFF : 106-149, 155-199, 208-299, 301-399, 1 31-32-00Page B33 1401-499, 1Aug 01/05 1 1 1CES 1
In the event of incorrect reception (label absent or SSM at FW confirmation over 3 cycles) of this label, the CFDIU memorizes: "NO CIDS 1 DATA"
-
Monitoring of the MCDU 1 and 2 (external faults) In the event of incorrect reception (label absent or SSM at FW, confirmation over 3 cycles) of label 270, the CFDIU memorizes:
"NO MCDU (1 or 2) DATA"
-
Monitoring of the PRINTER (if installed) (external fault) In the event of incorrect reception (label absent or SSM at FW, confirmation over 3 cycles) of label 350, the CFDIU memorizes:
"NO PRINTER DATA" (details of label 350 are given in the ARINC 740 specification)
-
Monitoring of CFDIU, MCDU 3 (if installed) and clock (internal faults) Monitoring and associated message are identical to the case of the Normal Mode described above.
(2)
LRU identification function The purpose of this function is to display the computer part number.
(3)
GROUND SCANNING function The purpose of this function is to present the internal or external faults on the ground, whether these faults are already present in flight or not. These faults are detected through monitoring activated on manual selection of the function.
(a) Handling of faults
1_ Activation
- After manual selection of the function, the CFDIU monitors
the internal and external faults.
- The ATA reference and the time at which the fault is
detected are associated with each fault message.
2_ Presentation capacity
Presentation capacity is 5 failures while new faults delete
the oldest ones.
3_ The presentation of this function is identical to that of the
LAST LEG REPORT.
4_ During function progress the CFDIU presents the message: IN
PROGRESS (50 SEC) and a RETURN/STOP key is presented to enable
function interruption and return to CFDIU BITE menu.
R 1EFF : 106-149, 155-199, 208-299, 301-399, 1 31-32-00Page B34 1401-499, 1Aug 01/05 1 1 1CES 1
5_ Criteria of monitoring
- Monitoring is activated on function selection for the
following systems:
FAC 1, FDIU, DMC 1, AMU, CIDS 1, MCDU, PRINTER, CLOCK, CFDIU
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 指示/記錄系統(tǒng) 2(21)
