(2)
De-energize the aircraft electrical circuits
(Ref. TASK 24-41-00-862-002).
(3)
Put the system back to the serviceable condition.
(4) Put the aircraft back to the serviceable condition. R
1EFF : ALL 1 31-32-00Page 513 1 1 Feb 01/05 1 1 1CES 1R **ON A/C 051-052,
R TASK 31-32-00-740-006 R Read the POST FLIGHT REPORT for FDIU Class 2 Maintenance Messages R NOTE : We recommend you do this procedure before you do other maintenance
____ R action
R 1. Reason for the Job
__________________ R Refer to the MPD TASK: 313000-04 R 2. Job Set-up Information
______________________
R A. Referenced Information
R -------------------------------------------------------------------------------R REFERENCE DESIGNATION R -------------------------------------------------------------------------------
R 24-41-00-861-002 R R 24-41-00-862-002 R R 31-33-00-710-001 R
R 3. Job Set-up
__________
R Subtask 31-32-00-861-072 Energize the Aircraft Electrical Circuits from the External Power De-energize the Aircraft Electrical Circuits Supplied from the External Power Operational Test of the Power Interlocks and Status Monitoring
R A. Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002)
R Subtask 31-32-00-865-075
R B. Make sure that this(these) circuit breaker(s) is(are) closed:
R -------------------------------------------------------------------------------R PANEL DESIGNATION IDENT. LOCATION R -------------------------------------------------------------------------------R 121VU PTR/SPLY 6TW J21 R 121VU CFDS/CFDIU/SPLY 2TW J18 R 121VU CFDS/CFDIU/BACK/UP 8TW J17
R 1EFF : 051-052, 1 31-32-00Page 514 1 1 May 01/05 1 1 1CES 1
R 4. Procedure_________
R Subtask 31-32-00-740-055
R A. Read the POST FLIGHT REPORT for FDIU Class 2 Maintenance Messages
R -------------------------------------------------------------------------------
R ACTION RESULT
R -------------------------------------------------------------------------------
R 1. Adjust the brightness of the MCDU
R 1 screen.
R - push the MCDU MENU mode key.
R 2. On the MCDU 1:
R - push the line key adjacent to
R the CFDS indication.
R - push the line key adjacent to
R the POST FLIGHT REP PRINT *
R indication.
-
the MCDU 1 is on.
-
the MCDU MENU page comes into view. On the MCDU 1:
-
the CFDS MENU page comes into view.
-
the printer prints the POST FLIGHT REPORT pages.
R 3. On the printed report, read the list of FAILURE MESSAGES for FDIU Class 2
R messages (SOURCE column):
R - if there are no Class 2 failure messages, go to the close-up para.
R
R - if there are Class 2 failure messages, do the operational test of the
R power interlocks and status monitoring (Ref. TASK 31-33-00-710-001).
R 5. Close-up
________ R Subtask 31-32-00-860-051 R A. Put the aircraft back to its initial configuration. R (1) On the MCDU, push the line key adjacent to the RETURN indication
R until the CFDS menu page comes into view.
R (2) De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-R 002).
R 1EFF : 051-052, 1 31-32-00Page 515 1 1 May 01/05 1 1 1CES 1R **ON A/C 051-099,
R TASK 31-32-00-740-008 R Read the POST FLIGHT REPORT for TPIU Class 2 Maintenance Messages R NOTE : We recommend you do this procedure before you do other maintenance
____ R action
R 1. Reason for the Job__________________
R Self Explanatory
R 2. Job Set-up Information______________________
R A. Referenced Information
R -------------------------------------------------------------------------------R REFERENCE DESIGNATION R -------------------------------------------------------------------------------
R 24-41-00-861-002 R R 24-41-00-862-002 R R 32-49-00-710-001 R
R 3. Job Set-up
__________
R Subtask 31-32-00-861-074 Energize the Aircraft Electrical Circuits from the External Power De-energize the Aircraft Electrical Circuits Supplied from the External Power Operational Test of the Tire Pressure Indicating System (TPIS)
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 指示/記錄系統 2(48)
