-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
-Push the GND CTL button.
3. On the MCDU 1 or 2:
-
Push the line key adjacent to CFDS.
-
Push the line key adjacent to < SYSTEM REPORT / TEST.
-
Push the line key adjacent to INST >.
-
Push the line key adjacent to < FDIU
-
Push the line key adjacent to GND SCAN.
-Make sure that no failure is detected.
4. On the control panel 21VU:
-Push the GND CTL button.
-
The blue light ON comes on.On the MCDU screen:
-
The CFDS main menu comes into view.
-
The SYSTEM REPORT / TEST page comesinto view.
-
The SYSTEM REPORT / TEST INST pagecomes into view.
-
The FDIU page comes into view.
-
The FDIU GND SCAN page comes intoview.
-
The message ALL PASSED shows.
On the control panel 21VU:
-
The blue light ON goes off.
NOTE : The recorder is now in a serviceable condition.____
R **ON A/C 051-099,
R Subtask 31-33-00-710-061
R A. Test of the QAR
R
R NOTE : After electrical power is supplied to the recorder the unit____
R performs its self test.
R
R 1EFF : 001-049, 051-099, 101-105, 1 31-33-00Page 512 1 1 May 01/05 1 1 1CES 1R -------------------------------------------------------------------------------R ACTION RESULT R -------------------------------------------------------------------------------
R 1. On the QAR 3TU:
R - Make sure that non optical disk
R is installed in the QAR.
R
R 2. On the QAR 3TU:
R - Open the recorder front access
R door.
R - Put a new formatted optical
R disk into the recorder, so that
R the arrow is is on the left
R side. Push the disk fully.
R - Close the recorder front access
R door and lock the door.
R 3. On the control panel 21VU:
R - Push the GND CTL button.
R 4. On the MCDU 1 or 2:
R - Push the line key adjacent to
R CFDS.
R - Push the line key adjacent to <
R SYSTEM REPORT / TEST.
R - Push the line key adjacent to
R INST >.
R - Push the line key adjacent to <
R FDIU
R - Push the line key adjacent to
R GND SCAN.
R - Make sure that no failure is
R detected.
R 5. On the control panel 21VU:
R - Push the GND CTL button.
On the QAR 3TU front panel:
-
The red STATUS indicator is on.
-
The green ON indicator is on.
-
The red DISK LOW indicator is off. On the QAR 3TU front panel:
-
The red indicator STATUS goes off.
-
The green indicator ON stays on.
-
The red indicator DISK LOW stays off.
On the control panel 21VU:
-
The blue light ON comes on. On the MCDU screen:
-
The CFDS main menu comes into view.
-
The SYSTEM REPORT / TEST page comes into view.
-
The SYSTEM REPORT / TEST INST page comes into view.
-
The FDIU page comes into view.
-
The FDIU GND SCAN page comes into view.
-
The message ALL PASSED shows.
-
The blue light ON goes off.
On the control panel 21VU:
R 1EFF : 051-099, 1 31-33-00Page 513 1 1 May 01/05 1 1 1CES 1
R -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
R NOTE : The recorder is now in a serviceable condition.____
R **ON A/C 001-049, 051-099, 101-105,
5. Close-up________
Subtask 31-33-00-862-053
A. Put the aircraft back to its initial configuration.
(1) De-energize the CFDS (Ref. TASK 31-32-00-860-008).
(2) Do the EIS stop procedure (Ref. TASK 31-60-00-860-002).
(3) De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).
R 1EFF : 001-049, 051-099, 101-105, 1 31-33-00Page 514 1 1 May 01/05 1 1 1CES 1 **ON A/C ALL
TASK 31-33-00-710-006
Operational Check of DFDR System via MCDU
1.
Reason for the Job
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 指示/記錄系統 2(83)
