R 31-32-00-740-009 __________
3. Job Set-up
R Subtask 31-32-00-860-118 Energize the Aircraft Electrical Circuits from the External PowerDe-energize the Aircraft Electrical Circuits Supplied from the External Power Read the AVIONICS STATUS on the MCDU
R A. Aircraft Maintenance Configuration
R (1) Energize the aircraft electrical circuits R (Ref. TASK 24-41-00-861-002).
R (2) On the overhead panel, make sure that: R R - The ON legend of the APU/MASTER SW, ENG/FADEC GND PWR/1 and R ENG/FADEC GND PWR/2 pushbutton switches is on. R R - The OFF or FAULT legend of the ELEC/BAT 1, ELEC/BAT 2, ADR 1, ADR 2 R and ADR 3 pushbutton switches is not on. R
1EFF : ALL 1 31-32-00Page 203 1 1 May 01/02 1 1 1CES 1 1EFF : ALL 1 31-32-00Page 204 1 1 Feb 01/05 1 1 1CES 1
- The OFF/NAV/ATT selector switches related to the IR 1, IR 2 and IR 3 are at NAV.
(3) You can read the AVIONICS STATUS on the MCDU to get the list of unit(s) that have a class 3 fault (Ref. TASK 31-32-00-740-009).
Subtask 31-32-00-865-052
B. Make sure that this(these) circuit breaker(s) is(are) closed:
R -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU AUTO FLT/MCDU/1 11CA1 B01 121VU PTR/SPLY 6TW J21 121VU CFDS/CFDIU/SPLY 2TW J18 121VU AUTO FLT/MCDU/2 11CA2 N20
R **ON A/C ALL
R Post SB 31-1163 For A/C 155-156,208-209,
R 121VU CFDS/CFDIU/BACK/UP 8TW J17
**ON A/C ALL
4. Procedure
_________ R **ON A/C 001-049, 051-099, 101-149, 155-199, 201-299, 301-399, 401-499,
Subtask 31-32-00-860-095
A. Do this procedure:
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1.
Adjust the brightness of the MCDU 1(2) screen.
2.
push the MCDU MENU mode key.
3.
push the line key adjacent to the CFDS indication.
4.
push the line key adjacent to the AVIONICS STATUS indication.
5.
push the line key adjacent to the PRINT indication. the (CLASS 3) indication which follows the name of a system has a CLASS 3 fault.
6.
push the line key adjacent to the RETURN indication.
7.
push the line key adjacent to the SYSTEM REPORT/TEST indication.
8.
set the system with a CLASS 3 fault:
-push the line key adjacent to the name of the system (for some systems, use a secondaryOn the MCDU 1(2):
-
the MCDU MENU page comes into view.
-
the CFDS MENU page comes into view.
-
the AVIONICS STATUS page comes intoview. Make sure that the NO DATA FROM indication is not shown.
-
the printer prints the related page.
-
the CFDS MENU page comes into view.
-
the SYSTEM REPORT/TEST page comesinto view.
-
the page of the system set comes intoview.
1EFF : ALL 1 31-32-00Page 205 1 1 Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
menu and/or the NEXT PAGE
function key).
9.
Push the line key adjacent to the CLASS 3 FAULTS, or SCHEDULED MAINT REPORT indication. If the two indications are shown, push the line key adjacent to the SCHEDULED MAINT REPORT indication first, then push the line key adjacent to the CLASS 3 FAULTS indication.
10.
Only read faults:
-with no date (type 2 systems).
- or with the date of the LAST LEG REPORT (type 1 systems). For the other dates, ignore the faults because they stopped or are corrected.
NOTE : For a flight which
____ includes 2 dates, you can find the CLASS 3 faults with a date different to the date of the LAST LEG REPORT (the LAST LEG REPORT always has the date of the departure).
11.
Push the line key adjacent to the RETURN indication until the SYSTEM REPORT/TEST page comes into view.
12.
Do the steps 8. to 11. for all the systems with the (CLASS 3) indication on the AVIONICS STATUS page.
-the page with the list of the CLASS 3faults related to the system comesinto view (the operator can then makethe decision to correct these faultsor not).
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 指示/記錄系統(tǒng) 2(24)
