(2)
De-pressurize the Yellow hydraulic system or Green hydraulic system (Ref. TASK 29-24-00-864-001) or (Ref. TASK 29-23-00-864-001).
(3)
De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).
(4)
Remove the warning notice(s).
1EFF : ALL 1 31-32-00Page 213 1 1 Feb 01/05R 1 1 1CES 1
TASK 31-32-00-860-001 Procedure to Get Access to the SYSTEM REPORT/TEST Menu Page WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE
_______ YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
NOTE : IGNORE ALL THE ECAM WARNINGS AS LONG AS THE COMPUTER IS IN THE MENU
____ MODE.
1. Reason for the Job
__________________
To get access to the SYSTEM REPORT/TEST pages
This job gives access to the SYSTEM REPORT/TEST pages of the systems
connected to the CFDS.
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 31-32-00-991-001 Fig. 201
3. Job Set-up
__________ Subtask 31-32-00-860-056
A. Energize the aircraft electrical circuits
(Ref. TASK 24-41-00-861-002).
1EFF : ALL 1 31-32-00Page 214 1 1 Feb 01/05R 1 1 1CES 1
Subtask 31-32-00-865-063
B. Make sure that this(these) circuit breaker(s) is(are) closed:
R -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU AUTO FLT/MCDU/1 11CA1 B01 121VU CFDS/CFDIU/SPLY 2TW J18 121VU AUTO FLT/MCDU/2 11CA2 N20
R **ON A/C ALL
R Post SB 31-1163 For A/C 155-156,208-209,
R 121VU CFDS/CFDIU/BACK/UP 8TW J17
R **ON A/C ALL
4. Procedure_________
Subtask 31-32-00-860-057
A. Access to the SYSTEM REPORT/TEST Menu Pages (Ref. Fig. 201/TASK 31-32-00-991-001)
NOTE : The procedure below is applicable to the MCDU 1 or 2.____ The actions and the results of this procedure occur on the MCDU used.
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
On the MCDU:
-Adjust the brightness of the MCDU screen:
-
push the MCDU MENU mode key.
-
push the line key adjacent to the CFDS indication.
On the MCDU:
-the MCDU MENU page comes into view.the CFDS MENU page comes into view.
R 1EFF : ALL 1 31-32-00Page 215 1 1 Feb 01/05 1 1 1CES 1
CFDS - SYSTEM REPORT/TEST - Menu Page Figure 201/TASK 31-32-00-991-001
R 1EFF : 1 1 1CES ALL 1 111 31-32-00 Page 216 Feb 01/05
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
-push the line key adjacent to the the SYSTEM REPORT/TEST page comes into SYSTEM REPORT/TEST indication. view
-if the page shown is not applicable, push the NEXT PAGE fonction key.
1EFF : ALL 1 31-32-00Page 217 1 1 Feb 01/05R 1 1 1CES 1
TASK 31-32-00-860-002 Procedure to Get Access to the SYSTEM REPORT/TEST/AIR COND Page WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE
_______ YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
NOTE : IGNORE ALL THE ECAM WARNINGS AS LONG AS THE COMPUTER IS IN THE MENU
____ MODE.
1. Reason for the Job__________________ Self Explanatory
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 指示/記錄系統 2(27)
