R EFF : 001-049, 101-105, 107-107, 151-199, 49-61-34Page 412 201-210, Config-2 Aug 01/05
CES Subtask 49-61-34-740-077
D. Additional Check Procedure
(1) Set the CFDS to get the SYSTEM REPORT/TEST page for the APU. (Ref. TASK 31-32-00-860-001)
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the MCDU, in use: On the MCDU:
-push the line key adjacent to - the LRU IDENTIFICATION page comes on. the LRU IDENTIFICATION indication. NOTE : Make sure that the P/N shown on
____ the LRU IDENTIFICATION page is the same as the P/N given on the front face of the computer. If the P/N is not the same, you must remove the computer and return it to the shop.
5. Close-up
________
R **ON A/C 001-049, 101-105, 107-107,
Subtask 49-61-34-410-053-A
A. Close Access
(1)
Set the APU MASTER SW pushbutton switch to the OFF position.
(2)
Make sure that the work area is clean and clear of tools and other items.
(3)
Install the access panel 162EW (Ref. TASK 25-55-12-400-003).
(4)
Close the BULK cargo-compartment door 827 (Ref. TASK 52-30-00-860-008)
(5)
Remove the access platform(s).
R EFF : 001-049, 101-105, 107-107, 151-199, 49-61-34Page 413 201-210, Config-2 Aug 01/05
CES **ON A/C 151-199,
Subtask 49-61-34-410-053-B
A. Close Access
(1)
Set the APU MASTER SW pushbutton switch to the OFF position.
(2)
Make sure that the work area is clean and clear of tools and other items.
(3)
Install the access panel 152FW (Ref. TASK 25-55-11-400-003).
(4)
Remove the access platform(s).
(5)
Close the AFT cargo-compartment door 826 (Ref. TASK 52-30-00-860-002).
**ON A/C 201-210,
Subtask 49-61-34-410-053
A. Close Access
(1)
Set the APU MASTER SW pushbutton switch to the OFF position.
(2)
Make sure that the work area is clean and clear of tools and other items.
(3)
Install the access panel 152HW (Ref. TASK 25-55-11-400-003).
(4)
Remove the access platform(s).
(5)
Close the AFT cargo-compartment door 826 (Ref. TASK 52-30-00-860-002).
R **ON A/C 001-049, 101-105, 107-107, 151-199, 201-210,
Subtask 49-61-34-860-065
B. Aircraft Maintenance Configuration.
(1) De-energize the ground service network
(Ref. TASK 24-42-00-862-001).
R EFF : 001-049, 101-105, 107-107, 151-199, 49-61-34Page 414 201-210, Config-2 Aug 01/05
CES CONTROL BOX - ELECTRONIC (ECB) (59KD) - REMOVAL/INSTALLATION
____________________________________________________________
TASK 49-61-34-000-002
Removal of the Electronic Control Box (ECB) (59KD) (APS 3200)
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific blanking caps
No specific circuit breaker(s) safety clip(s)
No specific access platform 2.0 m (6 ft. 7 in.)
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 25-55-11-000-003 Removal of the Sidewall Panels in the AFT Cargo Compartment - FR47/FR59 25-55-12-000-003 Removal of the Sidewall Panels in the AFT Cargo
Compartment - FR59/FR65 49-00-00-860-011 Update of APU Data (hours/cycles) (APS 3200) 52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the
Yellow Electric Pump
52-30-00-860-006 Open the Bulk Cargo-Compartment Door
R **ON A/C 106-106, 108-149, 221-221, 224-224, 228-228,
49-61-34-991-002-A Fig. 401 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
**ON A/C 211-220, 222-223, 225-227, 229-299, 301-399,
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 機載輔助動力 AIRBORNE AUXILIARY POWER5(113)
