曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 the ON position.  switch comes on.
 On the ECAM lower display unit:
 - the X-BLEED valve indication shows
 open.
 - the APU BLEED valve indication shows
 open.
 3. On the AIR COND panel 30VU:  On the ECAM lower display unit:
 - push the PACK 1 and PACK 2  - the system operation pressure is
 pushbutton switches to the ON  displayed. (It must be between 0.689
 position.  bar (9.9930 psi) and 2.068 bar
 (29.9937 psi)).
 4. On the AIR COND panel 30VU:  On the AIR COND panel 30VU:
 - push the PACK 1 and the PACK 2  - the OFF lights in the PACK 1 and PACK
 pushbutton switches to the OFF  2 pushbutton switches come on.
 position.
 5. On the AIR COND panel 30VU:  On the AIR COND panel 30VU:
 - push the APU BLEED switch to  - the blue ON light goes off in the APU
 the off position.  BLEED switch.
 On the ECAM lower display unit:
 - the APU BLEED valve indication shows
 closed.
 - the X-BLEED valve indication shows
 closed.

 (4)
 Examine the bleed load control valve connections for leaks (Ref. TASK 49-00-00-790-006). There must be no air leakage. The position indicator on the valve must indicate closed.

 (5)
 Shut-down the APU (Ref. TASK 49-00-00-860-009).

 

R  EFF : 001-049, 101-105, 107-107, 151-199, 49-51-51Page 409 201-210, Config-2 Aug 01/05
 CES  5. Close-up

________ Subtask 49-51-51-410-054
 A. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Set the LIGHT control SW 11LJ to the OFF position.

 (3)
 Close the APU access doors 315AL, 316AR (Ref. TASK 52-41-00-410-001).

 (4)
 Remove the access platform(s). Subtask 49-51-51-860-055

 B.
 Aircraft Maintenance Configuration

 (1)
 Pressurize the reservoirs of the hydraulic systems.
 (Ref. TASK 29-14-00-614-002).

 (2)
 De-energize the ground service network
 (Ref. TASK 24-42-00-862-001).

 (3)
 Remove the warning notice(s).

 

R  EFF : 001-049, 101-105, 107-107, 151-199, 49-51-51Page 410 201-210, Config-2 Aug 01/05
 CES  VALVE - SURGE CONTROL ((GTCP 36-300)) - SERVICING

_________________________________________________ R **ON A/C 001-003, 051-099, 401-499,
 TASK 49-51-52-600-001 Clean Surge Valve Filter (GTCP 36-300) WARNING : DO NOT TOUCH THE APU UNTIL IT IS SUFFICIENTLY COOL TO PREVENT BURNS
_______
 WHEN YOU DO THE MAINTENANCE TASK(S).

 1.
 Reason for the Job

__________________
 Refer to the MPD TASK: 495100-01

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking plugs
 No specific circuit breaker(s) safety clip(s)
 No specific access platform 3.5 m (11 ft. 6 in.)
 No specific Torque Wrench : range 0.00 to 1.20 m.daN

 (0.00 to 9.00 lbf.ft)
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
No specific  lockwire-corrosion resistant steel 0.8 mm (0.032 in) dia

 C. Expendable Parts -------------------------------------------------------------------------------
FIG.ITEM --------- |DESIGNATION ---------------------------------------- |IPC-CSN------------------------------
3  packing  49-51-52 01 -040
 3  packing  49-51-52 01 -040A
 7  packing  49-51-52 01 -060
 7  packing  49-51-52 01A-060
 7  packing  49-51-52 01A-060A
 D. Referenced Information
 ------------------REFERENCE  -------------------------------DESIGNATION ------------------------------

-------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External Power 24-42-00-862-001 De-energize the Ground Service Network Supplied from the External Power 29-00-00-864-001 Put the Related Hydraulic System in the Depressurized
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 機載輔助動力 AIRBORNE AUXILIARY POWER5(32)