Paint and Protective Coatings - Pylon and Nacelle Areas Figure 207/TASK 51-23-00-991-007
1EFF : ALL 1 51-23-00Page 243 1 1 May 01/04R 1 1 1CES 1
Subtask 51-23-00-370-054
B. Application of the Paint
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
WARNING : DO NOT GET THE COMPOUND ON YOUR SKIN._______ IF YOU DO: - RUB IT OFF IMMEDIATELY WITH A CLEAN CLOTH - WASH THE SKIN WITH SOAP AND RINSE WITH CLEAN WATER.
R R R R R (1) Apply the materials that follow in the given sequence to the area H1: - BONDING AND ADHESIVE COMPOUNDS (Material No. 08-008) - STRUCTURE PAINTS (Material No. 16-001) - PAINTS FOR DETAIL (INTERNAL AND EXTERN AL) (Material No. 07-005) - STRUCTURE PAINTS (Material No. 16-018)
R R R R (2) Apply the materials that follow in the given sequence to the area H2: - BONDING AND ADHESIVE COMPOUNDS (Material No. 08-008) - STRUCTURE PAINTS (Material No. 16-001) - STRUCTURE PAINTS (Material No. 16-018)
R R R (3) Apply the materials that follow in the given sequence to the area H3: - STRUCTURE PAINTS (Material No. 16-006) - STRUCTURE PAINTS (Material No. 16-018)
R R R R R (4) Apply the materials that follow in the given sequence to the area J1: - BONDING AND ADHESIVE COMPOUNDS (Material No. 08-008) - STRUCTURE PAINTS (Material No. 16-001) - PAINTS FOR DETAIL (INTERNAL AND EXTERN AL) (Material No. 07-005) - STRUCTURE PAINTS (Material No. 16-018)
5. Close-up
________ Subtask 51-23-00-410-054
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Remove the access platform(s).
(3)
Remove the warning notice(s).
(4)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
SEALING - GENERAL - DESCRIPTION AND OPERATION
_____________________________________________
1. General_______
R This topic gives data about the reasons for the use of sealants on the
R aircraft and the primary sealing areas.
R For sealing repairs (Ref. AMM 51-76-00).
2. Description___________
R (Ref. Fig. 001)
R A. Use of Sealants
R (1) The primary uses for sealants on the aircraft are:
R - sealing the fuselage structure to make sure that the necessary
R internal pressure is kept during the flight,
R - sealing the fuel tanks (Ref. AMM 51-76-12 for the repair of fuel
R tank sealing),
R - sealing the external joints of the aircraft structure to make sure
R that water does not go into the structure and to make the structure
R smoother,
R - sealing riveted and bolted joints to make sure that liquids do not
R get into the joints,
R - sealing sandwich structures to make sure that moisture does not go
R into the structure,
R - to prevent corrosion (galvanic action) between different metals,
R - to prevent corrosion between different materials, especially
R between CFRP and aluminum alloys,
R - to prevent fretting corrosion (fatigue stress or vibration between
R parts of the structure can cause this),
R - to fill cavities,
R - to protect the surface on housings, channels, tubes, electrical
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM STANDARD PRACTICES AND STRUCTURES(19)
