NOTE : Rub the area in the direction of the scratch. Do not rub with
____ a circular motion. Make sure you remove all the rough surface.
(10)
Clean the area with CLEANING AGENTS (Material No. 11-004) and a clean cloth.
(11)
Apply PRETREATMENT FOR PAINTING (Material No. 13-002) to the metal surface.
(12)
Apply the applicable surface protection (Ref. TASK 51-75-12-300-001).
5. Close-up
________ Subtask 51-73-11-942-052
A. Remove the ground support and maintenance equipment, the special and standard tools and all other items.
TASK 51-73-11-300-002
Repair of Minor Damage on Titanium, Forged Aluminum, or Steel Components
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL MATERIALS
_______
ONLY WITH A GOOD SUPPLY OF AIR.
OBEY THE MANUFACTURERS INSTRUCTIONS.
PUT ON PROTECTIVE CLOTHING.
DO NOT GET THEM IN YOUR MOUTH.
DO NOT SMOKE.
DO NOT BREATHE THE GAS.
THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT.
GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific abrasive cloth grade 280
No specific abrasive cloth grade 400
No specific lint-free cloth
No specific rounded scotch stone
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 05-025 USA MIL-P-6888
POLISH METAL ALUMINUM (Ref. 20-31-00)
R Material No. 11-002 USA MIL-PRF-680 DRY CLEANING SOLVENT (VARSOL/WHITE SPIRIT) (Ref. 20-31-00)
Material No. 11-004 USA MIL-T-81533
1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
(Ref. 20-31-00)
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 13-002 USA MIL-C-5541 MIL-C-81706 CLASS I/A
CHEMICAL CONVERSION COATING YELLOW ALUMINUM
(Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
51-74-11-300-001 Repair of Corroded Areas
51-75-12-300-001 Repair of Major Paint Damage on Light Alloy and
Composite Material
3. Job Set-up
__________
Subtask 51-73-11-941-053
A. Get access to the area of the damage.
4. Procedure
_________ Subtask 51-73-11-320-055 R A. Repair of Minor Damage
(1)
If necessary, remove any corrosion (Ref. TASK 51-74-11-300-001).
(2)
Measure the depth of the scratch.
R (3) Refer to the ASRM 51-73-00 and the applicable ASRM-chapter 52 thru 57 R for the permitted depth limits.
(4)
Clean the repair area with CLEANING AGENTS (Material No. 11-004) and a lint-free cloth.
(5)
For damage to titanium: CAUTION : USE WATER WHEN YOU GRIND TITANIUM. TITANIUM DUST IS
_______
FLAMMABLE.
(a)
Remove the paint from the area of the damage with abrasive cloth grade 280.
(b)
Remove the scratch with a rounded scotch stone and water. Move the scotch stone along the scratch until the contour is smooth and rounded.
(c)
Rub the roughened area with abrasive cloth grade 400 and CLEANING AGENTS (Material No. 11-002). Rub along the length of the scratch until the surface is smooth.
WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE
_______
SPECIAL MATERIAL.
THIS MATERIAL IS DANGEROUS.
(d)
Clean the area with CLEANING AGENTS (Material No. 11-004) and a lint-free cloth.
(e)
Polish the bare metal with SPECIAL MATERIALS (Material No. 05-025) and a lint-free cloth.
NOTE : Rub the area in the direction of the scratch. Do not rub
____ in a circular motion. Make sure you remove all the rough surfaces.
(f) Clean the area with CLEANING AGENTS (Material No. 11-004) and a clean cloth.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM STANDARD PRACTICES AND STRUCTURES(23)
