(2)
Remove the access platform(s).
(3)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
1EFF : ALL 1 51-74-11Page 810 1 1 May 01/99R 1 1 1CES 1
PAINT REPAIRS - DESCRIPTION AND OPERATION
_________________________________________
1. General_______
Paint and/or special coatings seal the aircraft structures against corrosion. The type of protective coating used depends on the location, function and corrosion resistance of the component.
You must repair any damage to the original protective treatment. Refer to AMM 51-23-00 and SRM 51-75-00 for the original build up.
STRIPPING/PAINT REMOVAL - CLEANING/PAINTING___________________________________________
TASK 51-75-11-100-001
Removal of Paint by the Application of Chemical Paint Strippers
1. Reason for the Job__________________
Self Explanatory
2. Job Set-up Information______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
RR R R No specific No specific No specific No specific No specific abrasive paper, grade 220 or 320 polyethylene film 1 BRUSH - BRISTLED, SOFT 1 BRUSH - NON METALLIC 1 SCRAPER - NON METALLIC
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R R Material No. 08-019 Material No. 11-004 Material No. 19-003 Material No. 19-011 FOIL, PRESSURE SENSITIVE (USE 08-108) (Ref. 20-31-00)USA MIL-T-81533 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) (Ref. 20-31-00) USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00) SCOTCH BRITE PADS (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
12-21-11-615-001 External Cleaning 51-76-11-300-001 Repair of the Sealing
3. Job Set-up
__________
Subtask 51-75-11-950-052
A. Protection of the Aircraft
CAUTION : MAKE SURE THAT THE MATERIALS, AREAS AND PARTS WHICH FOLLOW HAVE
_______ THE CORRECT PROTECTION FROM CHEMICAL PAINT STRIPPERS:
-RUBBER, ALL COMPOSITE PARTS, ACRYLIC MATERIALS, AERODYNAMIC SMOOTHER, METAL BONDED EDGES, PITOT PROBES, SENSORS, STATIC PORTS, ENGINE AIR INTAKE, PRECOOLER AIR OUTLET SCREEN, ENGINE EXHAUST DUCT, APU EXHAUST, APU INTAKES AND OUTLETS, AIR-CONDITIONING RAM AIR INLETS, LANDING GEARS, DOOR SEALS, ACCESS DOORS, CABIN WINDOW AND WINDSHIELD PANELS AND SEALS, ELECTRICAL EQUIPMENT AND CABLES, PLASTIC MATERIALS, EXTERNAL SKIN PANEL JOINTS, HIGH STRENGTH STEEL PARTS, DRAIN HOLES, VENTS AND ALL ANTENNAS.
(1) Use the polyethylene film and the BONDING AND ADHESIVE COMPOUNDS (Material No. 08-019) to mask the areas adjacent to the work area.
NOTE : Do not mask the joints of external skin panels (except in fuel
____
tank areas) if:
-there are no bonded doublers in the joints
-the total time you apply the stripper is less than four hours.
(2) If necessary, install the correct protection covers/devices to protect the adjacent aircraft components from damage and contamination (Ref. TASK 12-21-11-615-001).
1EFF : ALL 1 51-75-11Page 702 1 1 Aug 01/04R 1 1 1CES 1
4. Procedure
_________
Subtask 51-75-11-150-050
A. Removal of Paint by the Application of Chemical Paint Strippers -Metallic Materials Only
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
CAUTION : DO NOT USE CHEMICAL PAINT STRIPPERS TO REMOVE PAINT FROM_______ COMPOSITE MATERIALS. THE STRIPPERS CAN CAUSE DAMAGE TO THE SURFACE AND DELAMINATION OF THE COMPOSITE STRUCTURE.
R R CAUTION : DO NOT USE A METAL SCRAPER TO REMOVE THE UNWANTED MATERIAL. A_______ METAL SCRAPER CAN CAUSE DAMAGE TO THE SURFACE OF THE COMPONENT.
NOTE : This procedure gives the data necessary to remove the top coat of____ the paint system, but not to remove the basic primer.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM STANDARD PRACTICES AND STRUCTURES(28)
