EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
49-31-21
ALL ú ú 01 Page 401 ú Jul 15/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / GTCP85-129 SERIES /737-300/400/500/ ENGINES /MAINTENANCE MANUAL ////////////////////////
SEEB
SEE A
FWD
FUEL HOSE
A
TEE FITTING
1 AIRPLANES WITHOUT THE TAFCU
2 AIRPLANES WITH THE TAFCU
FUEL HOSE
BOLT
ELBOW WASHER NUT
NUT FILTERSUPPORTPACKING ASSEMBLYBRACKET NUT
BOWL PACKING
FUEL CONTROL UNIT
LOW PRESSURE
NUT
FUEL FILTER
PACKING
FITTING FOR THE FUEL PUMP INLET
FILTER
FILTER
JAMNUT
ASSEMBLY BOWL
ASSEMBLY HEAD SEAL DRAIN OUTLET
FWD FOR THE FUEL CONTROL UNIT
B1
FILTER
ASSEMBLY
HEAD SUPPORT
BRACKET FUEL CONTROL UNIT
NUT PACKING
JAMNUT
BOLT WASHER SEAL DRAIN OUTLET
NUT
FOR THE FUEL
CONTROL UNIT
FITTING FOR
THE FUEL PUMP
INLET
FWD
B2
Low Pressure Fuel Filter Unit Installation
Figure 401
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
49-31-21
ALL ú ú 01 Page 402 ú Mar 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
(e)
Turn the support bracket out of the way.
(f)
Remove the filter head from the fitting for the fuel pump inlet.
(g)
Remove and discard the packing.
(h)
Remove the elbow from the inlet side of the filter head assembly. 1) Remove and discard the packing. 2) Keep the fitting to install on the replacement filter
assembly.
(i)
Install the filter bowl on the filter head assembly.
(j)
Install the caps and plugs on all the disconnected lines and ports to prevent contamination.
TASK 49-31-21-404-006
3. Low Pressure Fuel Filter Installation (Fig. 401)
_____________________________________
A. References
(1) AMM 49-31-22/401, Low Pressure Fuel Filter Element
B. Access
(1)
Location Zones
703 APU Compartment
(2)
Access Panels
3804 APU Cowl Door
C. Procedure
S 424-008
(1) Install the fuel filter assembly:
(a)
Remove the caps and plugs from all the disconnected lines and ports.
(b)
Remove the filter bowl from the filter head assembly.
(c)
Install a new packing on the elbow.
(d)
Install the elbow in the inlet port on the filter head assembly. 1) Do not tighten the jamnut at this time.
(e)
Install a new packing on the fuel pump fitting.
(f)
Install the filter head on the fitting. 1) Do not tighten the jamnut at this time.
(g)
Put the filter support bracket in its position and install the bolt, the washer, and the nut. 1) Tighten the nut and the jamnut on the seal drain outlet of
the fuel control unit.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
49-31-21
ALL ú ú 01 Page 403 ú Mar 15/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / GTCP85-129 SERIES /737-300/400/500/ ENGINES/MAINTENANCE MANUAL ////////////////////////
(h)
Put the filter assembly in its correct position and tighten the jamnut on the fuel pump fitting.
(i)
Connect the fuel hose to the elbow on the filter head assembly. 1) Tighten the hose nut and the jamnut on the elbow fitting.
S 434-007
(2) Do this task: "Low Pressure Fuel Filter Element Installation" (AMM 49-31-22/401).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 AIRBORNE AUXILIARY POWER 2(25)
